lkml.org 
[lkml]   [2019]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
On Thu, Oct 10, 2019 at 01:33:06AM +0900, Masahiro Yamada wrote:
> On Thu, Oct 10, 2019 at 12:27 AM William Breathitt Gray
> <vilhelm.gray@gmail.com> wrote:
> >
> > Replace verbose implementation in set_multiple callback with
> > for_each_set_clump8 macro to simplify code and improve clarity. An
> > improvement in this case is that banks that are not masked will now be
> > skipped.
> >
> > Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
> > Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> > ---
> > drivers/gpio/gpio-uniphier.c | 16 ++++++----------
> > 1 file changed, 6 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
> > index 93cdcc41e9fb..3e4b15d0231e 100644
> > --- a/drivers/gpio/gpio-uniphier.c
> > +++ b/drivers/gpio/gpio-uniphier.c
> > @@ -15,9 +15,6 @@
> > #include <linux/spinlock.h>
> > #include <dt-bindings/gpio/uniphier-gpio.h>
> >
> > -#define UNIPHIER_GPIO_BANK_MASK \
> > - GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
> > -
> > #define UNIPHIER_GPIO_IRQ_MAX_NUM 24
> >
> > #define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
> > @@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
> > static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
> > unsigned long *mask, unsigned long *bits)
> > {
> > - unsigned int bank, shift, bank_mask, bank_bits;
> > - int i;
> > + unsigned long i;
> > + unsigned long bank_mask;
> > + unsigned long bank;
> > + unsigned long bank_bits;
>
>
> Please do not split it into multiple lines
> unless you need to do so.
>
> Thanks.

No problem, I'll update this patch to declare them all on the same line.

William Breathitt Gray

> > - for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
> > + for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
> > bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
> > - shift = i % BITS_PER_LONG;
> > - bank_mask = (mask[BIT_WORD(i)] >> shift) &
> > - UNIPHIER_GPIO_BANK_MASK;
> > - bank_bits = bits[BIT_WORD(i)] >> shift;
> > + bank_bits = bitmap_get_value8(bits, i);
> >
> > uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
> > bank_mask, bank_bits);
> > --
> > 2.23.0
> >
>
>
> --
> Best Regards
> Masahiro Yamada

\
 
 \ /
  Last update: 2019-10-09 19:06    [W:0.042 / U:31.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site