lkml.org 
[lkml]   [2019]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
From
Date
Hi Scott,

On 2019/10/9 15:13, Scott Wood wrote:
> On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote:
>> Hi Scott,
>>
>> Would you please take sometime to test this?
>>
>> Thank you so much.
>>
>> On 2019/9/24 13:52, Jason Yan wrote:
>>> Hi Scott,
>>>
>>> Can you test v7 to see if it works to load a kernel at a non-zero address?
>>>
>>> Thanks,
>
> Sorry for the delay. Here's the output:
>

Thanks for the test.

> ## Booting kernel from Legacy Image at 10000000 ...
> Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 7521134 Bytes = 7.2 MiB
> Load Address: 04000000
> Entry Point: 04000000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at 1fc00000
> Booting using the fdt blob at 0x1fc00000
> Uncompressing Kernel Image ... OK
> Loading Device Tree to 07fe0000, end 07fff65c ... OK
> KASLR: No safe seed for randomizing the kernel base.
> OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
> OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
> OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
> Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb

When boot from 04000000, the max CAM value is 64M. And
you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only
192M memory is mapped and when kernel is randomized at the middle of
this 192M memory, we will not have enough continuous memory for node map.

Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works?

Thanks.

> Linux version 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty (scott@snotra) (gcc version 8.
> 1.0 (GCC)) #26 SMP Wed Oct 9 01:50:40 CDT 2019
> Using CoreNet Generic machine description
> printk: bootconsole [udbg0] enabled
> CPU maps initialized for 1 thread per core
> -----------------------------------------------------
> phys_mem_size = 0x2fc000000
> dcache_bsize = 0x40
> icache_bsize = 0x40
> cpu_features = 0x00000000000003b4
> possible = 0x00000000010103bc
> always = 0x0000000000000020
> cpu_user_features = 0x8c008000 0x08000000
> mmu_features = 0x000a0010
> physical_start = 0xc7c4000
> -----------------------------------------------------
> CoreNet Generic board
> mpc85xx_qe_init: Could not find Quicc Engine node
> barrier-nospec: using isync; sync as speculation barrier
> Zone ranges:
> Normal [mem 0x0000000004000000-0x000000000fffffff]
> HighMem [mem 0x0000000010000000-0x00000002ffffffff]
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000004000000-0x00000002ffffffff]
> Initmem setup node 0 [mem 0x0000000004000000-0x00000002ffffffff]
> Kernel panic - not syncing: Failed to allocate 125173760 bytes for node 0 memory
> map
> CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty #26
> Call Trace:
> [c989fe10] [c924bfb0] dump_stack+0x84/0xb4 (unreliable)
> [c989fe30] [c880badc] panic+0x140/0x334
> [c989fe90] [c89a1144] alloc_node_mem_map.constprop.117+0xa0/0x11c
> [c989feb0] [c95481c4] free_area_init_node+0x314/0x5b8
> [c989ff30] [c9548b34] free_area_init_nodes+0x57c/0x5c0
> [c989ff80] [c952cbb4] setup_arch+0x250/0x270
> [c989ffa0] [c95278e0] start_kernel+0x74/0x4e8
> [c989fff0] [c87c4478] set_ivor+0x150/0x18c
> Kernel Offset: 0x87c4000 from 0xc0000000
> Rebooting in 180 seconds..
>
> -Scott
>
>
>
> .
>

\
 
 \ /
  Last update: 2019-10-09 10:42    [W:0.053 / U:4.936 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site