lkml.org 
[lkml]   [2019]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: sprd: Add PIN_CONFIG_BIAS_DISABLE configuration support
Date
Add PIN_CONFIG_BIAS_DISABLE configuration support for Spreadtrum pin
controller.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/pinctrl/sprd/pinctrl-sprd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 7b95bf5..8869843 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -484,6 +484,13 @@ static int sprd_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin_id,
SLEEP_PULL_UP_MASK) << 16;
arg |= (reg >> PULL_UP_SHIFT) & PULL_UP_MASK;
break;
+ case PIN_CONFIG_BIAS_DISABLE:
+ if ((reg & (SLEEP_PULL_DOWN | SLEEP_PULL_UP)) ||
+ (reg & (PULL_DOWN | PULL_UP_4_7K | PULL_UP_20K)))
+ return -EINVAL;
+
+ arg = 1;
+ break;
case PIN_CONFIG_SLEEP_HARDWARE_STATE:
arg = 0;
break;
@@ -674,6 +681,16 @@ static int sprd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin_id,
shift = PULL_UP_SHIFT;
}
break;
+ case PIN_CONFIG_BIAS_DISABLE:
+ if (is_sleep_config == true) {
+ val = shift = 0;
+ mask = SLEEP_PULL_DOWN | SLEEP_PULL_UP;
+ } else {
+ val = shift = 0;
+ mask = PULL_DOWN | PULL_UP_20K |
+ PULL_UP_4_7K;
+ }
+ break;
case PIN_CONFIG_SLEEP_HARDWARE_STATE:
continue;
default:
--
1.7.9.5
\
 
 \ /
  Last update: 2019-10-09 06:54    [W:1.237 / U:33.036 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site