lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/10] rtc: ds1347: use regmap_update_bits
Date
Use regmap_update_bits instead of open coding. Also add proper error
handling.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-ds1347.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-ds1347.c b/drivers/rtc/rtc-ds1347.c
index eeaf43586bce..a49ce9991916 100644
--- a/drivers/rtc/rtc-ds1347.c
+++ b/drivers/rtc/rtc-ds1347.c
@@ -29,6 +29,8 @@
#define DS1347_STATUS_REG 0x17
#define DS1347_CLOCK_BURST 0x3F

+#define DS1347_WP_BIT BIT(7)
+
#define DS1347_NEOSC_BIT BIT(7)
#define DS1347_OSF_BIT BIT(2)

@@ -117,7 +119,7 @@ static int ds1347_probe(struct spi_device *spi)
struct rtc_device *rtc;
struct regmap_config config;
struct regmap *map;
- unsigned int data;
+ int err;

memset(&config, 0, sizeof(config));
config.reg_bits = 8;
@@ -141,9 +143,9 @@ static int ds1347_probe(struct spi_device *spi)
spi_set_drvdata(spi, map);

/* Disable the write protect of rtc */
- regmap_read(map, DS1347_CONTROL_REG, &data);
- data = data & ~(1<<7);
- regmap_write(map, DS1347_CONTROL_REG, data);
+ err = regmap_update_bits(map, DS1347_CONTROL_REG, DS1347_WP_BIT, 0);
+ if (err)
+ return err;

rtc = devm_rtc_allocate_device(&spi->dev);
if (IS_ERR(rtc))
--
2.21.0
\
 
 \ /
  Last update: 2019-10-07 15:48    [W:0.477 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site