lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net,v2 2/2] arm: dts: mediatek: Fix mt7629 dts to reflect the latest dt-binding
Date
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK
* Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
* Set gmac1 to gmii mode that connect to a internal gphy

Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
--
v1->v2:
* SGMII port only support BASE-X at 2.5Gbit.
---
arch/arm/boot/dts/mt7629-rfb.dts | 13 ++++++++++++-
arch/arm/boot/dts/mt7629.dtsi | 2 --
2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 3621b7d2b22a..9980c10c6e29 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -66,9 +66,21 @@
pinctrl-1 = <&ephy_leds_pins>;
status = "okay";

+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
+ phy-mode = "gmii";
phy-handle = <&phy0>;
};

@@ -78,7 +90,6 @@

phy0: ethernet-phy@0 {
reg = <0>;
- phy-mode = "gmii";
};
};
};
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 9608bc2ccb3f..867b88103b9d 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -468,14 +468,12 @@
compatible = "mediatek,mt7629-sgmiisys", "syscon";
reg = <0x1b128000 0x3000>;
#clock-cells = <1>;
- mediatek,physpeed = "2500";
};

sgmiisys1: syscon@1b130000 {
compatible = "mediatek,mt7629-sgmiisys", "syscon";
reg = <0x1b130000 0x3000>;
#clock-cells = <1>;
- mediatek,physpeed = "2500";
};
};
};
--
2.17.1
\
 
 \ /
  Last update: 2019-10-07 09:09    [W:0.083 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site