lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
From
Hi Ardelean, 

On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote:
>On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote:
>> [External]
>>
>> Add devicetree binding for Analog Devices ADUX1020 Photometric
>> sensor.
>>
>
>Hey,
>
>Thanks for the patches.
>
>This dt-binding docs is in text format.
>dt-binding docs now need to be in YAML format.
>

Sure. I can convert to YAML binding.

>Also, patches for dt-bindings docs usually come after the driver is
>added.
>So, this patch should be the second in the series, not the first.
>

I don't think so. The convention is to put dt-bindings patch upfront for all subsystems. Not sure if IIO differs here.

Thanks,
Mani
>Alex
>
>> Signed-off-by: Manivannan Sadhasivam
><manivannan.sadhasivam@linaro.org>
>> ---
>> .../bindings/iio/light/adux1020.txt | 22
>+++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/iio/light/adux1020.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt
>> b/Documentation/devicetree/bindings/iio/light/adux1020.txt
>> new file mode 100644
>> index 000000000000..e896dda30e36
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt
>> @@ -0,0 +1,22 @@
>> +Analog Devices ADUX1020 Photometric sensor
>> +
>> +Link to datasheet:
>>
>https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf
>> +
>> +Required properties:
>> +
>> + - compatible: should be "adi,adux1020"
>> + - reg: the I2C address of the sensor
>> +
>> +Optional properties:
>> +
>> + - interrupts: interrupt mapping for IRQ as documented in
>> +
>Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>> +
>> +Example:
>> +
>> +adux1020@64 {
>> + compatible = "adi,adux1020";
>> + reg = <0x64>;
>> + interrupt-parent = <&msmgpio>;
>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
>> +};

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

\
 
 \ /
  Last update: 2019-10-07 14:41    [W:0.208 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site