lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
From
Date
Jacek

On 10/6/19 11:12 AM, Jacek Anaszewski wrote:
> Dan,
>
> On 10/1/19 4:56 PM, Dan Murphy wrote:
>> Introduce the LP5036/30/24/18/12/9 RGB LED driver.
>> The difference in these parts are the number of
>> LED outputs where the:
>>
>> LP5036 can control 36 LEDs
>> LP5030 can control 30 LEDs
>> LP5024 can control 24 LEDs
>> LP5018 can control 18 LEDs
>> LP5012 can control 12 LEDs
>> LP5009 can control 9 LEDs
>>
>> The device has the ability to group LED output into control banks
>> so that multiple LED banks can be controlled with the same mixing and
>> brightness. Inversely the LEDs can also be controlled independently.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>> drivers/leds/Kconfig | 11 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-lp50xx.c | 784 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 796 insertions(+)
>> create mode 100644 drivers/leds/leds-lp50xx.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index cfb1ebb6517f..84f60e35c5ee 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -363,6 +363,17 @@ config LEDS_LP3952
>> To compile this driver as a module, choose M here: the
>> module will be called leds-lp3952.
>>
>> +config LEDS_LP50XX
>> + tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
>> + depends on LEDS_CLASS && REGMAP_I2C
>> + depends on LEDS_CLASS_MULTI_COLOR
>> + help
>> + If you say yes here you get support for the Texas Instruments
>> + LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called leds-lp50xx.
>> +
>> config LEDS_LP55XX_COMMON
>> tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>> depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 841038cfe35b..7a208a0f7b84 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
>> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
>> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
>> obj-$(CONFIG_LEDS_LP3952) += leds-lp3952.o
>> +obj-$(CONFIG_LEDS_LP50XX) += leds-lp50xx.o
>> obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
>> obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
>> obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
>> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
> [...]
>> +static int lp50xx_probe_dt(struct lp50xx *priv)
>> +{
>> + u32 led_banks[LP5036_MAX_LED_MODULES];
>> + struct fwnode_handle *child = NULL;
>> + struct fwnode_handle *led_node = NULL;
>> + struct led_init_data init_data;
>> + struct lp50xx_led *led;
>> + int num_colors;
>> + u32 color_id;
>> + int led_number;
>> + size_t i = 0;
>> + int ret;
>> +
>> + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
>> + "enable", GPIOD_OUT_LOW);
>> + if (IS_ERR(priv->enable_gpio)) {
>> + ret = PTR_ERR(priv->enable_gpio);
>> + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
>> + ret);
>> + return ret;
>> + }
>> +
>> + priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
>> + if (IS_ERR(priv->regulator))
>> + priv->regulator = NULL;
>> +
>> + device_for_each_child_node(&priv->client->dev, child) {
>> + led = &priv->leds[i];
>> + if (fwnode_property_present(child, "ti,led-bank")) {
>> + ret = fwnode_property_read_u32_array(child,
>> + "ti,led-bank",
>> + NULL, 0);
>> + ret = fwnode_property_read_u32_array(child,
>> + "ti,led-bank",
>> + led_banks,
>> + ret);
> You could check if bank numbers are within a range.

Ack


>
>> + if (ret) {
>> + dev_err(&priv->client->dev,
>> + "led-bank property is missing\n");
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> +
>> + priv->num_of_banked_leds = ARRAY_SIZE(led_banks);
>> +
>> + ret = lp50xx_set_banks(priv, led_banks);
>> + if (ret) {
>> + dev_err(&priv->client->dev,
>> + "Cannot setup banked LEDs\n");
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> + led->ctrl_bank_enabled = 1;
>> +
>> + } else {
>> + ret = fwnode_property_read_u32(child, "reg",
>> + &led_number);
> The same applies to the led_number.

NACK to this.  This is checked below.  But I should probably move that
check up into the else case.

Dan


>
>> + if (ret) {
>> + dev_err(&priv->client->dev,
>> + "led reg property missing\n");
>> + fwnode_handle_put(child);
>> + goto child_out;
>> + }
>> +
>> + led->led_number = led_number;
>> + }

\
 
 \ /
  Last update: 2019-10-07 14:33    [W:0.663 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site