lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 RESEND] drm/bridge: dw-hdmi: Restore audio when setting a mode
From
Date
Hi,

On 03/10/2019 06:14, Cheng-Yi Chiang wrote:
> From: Daniel Kurtz <djkurtz@chromium.org>
>
> When setting a new display mode, dw_hdmi_setup() calls
> dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
> the audio clock.
>
> We should only (re-)enable the audio clock if audio was already enabled
> when setting the new mode.
>
> Without this patch, on RK3288, there will be HDMI audio on some monitors
> if i2s was played to headphone when the monitor was plugged.
> ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Change from v1 to v2:
> - Use audio_lock to protect audio clock.
> - Fix the patch title.
>
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index aa7efd4da1c8..749d8e4c535b 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1982,6 +1982,17 @@ static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi)
> HDMI_IH_MUTE_FC_STAT2);
> }
>
> +static void dw_hdmi_audio_restore(struct dw_hdmi *hdmi)
> +{
> + unsigned long flags;
> +
> + spin_lock_irqsave(&hdmi->audio_lock, flags);
> +
> + hdmi_enable_audio_clk(hdmi, hdmi->audio_enable);
> +
> + spin_unlock_irqrestore(&hdmi->audio_lock, flags);

Dumb question, why is this protected by a spinlock ?

Neil

> +}
> +
> static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> {
> int ret;
> @@ -2045,7 +2056,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>
> /* HDMI Initialization Step E - Configure audio */
> hdmi_clk_regenerator_update_pixel_clock(hdmi);
> - hdmi_enable_audio_clk(hdmi, true);
> + dw_hdmi_audio_restore(hdmi);
> }
>
> /* not for DVI mode */
>

\
 
 \ /
  Last update: 2019-10-07 13:59    [W:0.183 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site