lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] regulator: da9062: add voltage selection gpio support
On 19-10-04 21:41, Linus Walleij wrote:
> On Tue, Sep 17, 2019 at 2:43 PM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> > + /*
> > + * We only must ensure that the gpio device is probed before the
> > + * regulator driver so no need to store the reference global. Luckily
> > + * devm_* releases the gpio upon a unbound action.
> > + */
> > + gpi = devm_gpiod_get_from_of_node(cfg->dev, np, prop, 0, GPIOD_IN |
> > + GPIOD_FLAGS_BIT_NONEXCLUSIVE, label);
>
> Do you really need the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag here?
> I don't think so, but describe what usecase you have that warrants this
> being claimed twice. Normally that is just needed when you let the
> regulator core handle enablement of a regulator over GPIO, i.e.
> ena_gpiod in struct regulator_config.

This pin can be assigned to all regulators so it is shared across them
also it can be used as voltage-selection gpio by regulator and as
enable signal by an other regulator. I mentioned that within the
dt-bindings and also mentioned that the config has to be the same.

> > + /* We need the local number */
> > + nr = da9062_gpio_get_hwgpio(gpi);
>
> If you really need this we should add a public API to gpiolib and not
> create custom APIs.
>
> Just make a patch adding
>
> int gpiod_to_offset(struct gpio_desc *d);
>
> to the public gpiolib API in include/linux/gpio/consumer.h
>
> and add the code in gpiolib.c to do this trick.

Okay, I will add it.

Thanks for the review.

Regards,
Marco

> Yours,
> Linus Walleij
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2019-10-07 11:00    [W:0.071 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site