lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/5] arm64: dts: qcom: sdm845: Add unit name to soc node
On Mon, Oct 7, 2019 at 12:44 PM John Stultz <john.stultz@linaro.org> wrote:
>
> On Tue, Jul 23, 2019 at 9:51 PM Vinod Koul <vkoul@kernel.org> wrote:
> >
> > We get a warning about missing unit name for soc node, so add it.
> >
> > arch/arm64/boot/dts/qcom/sdm845.dtsi:623.11-2814.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
> >
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> > ---
> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 601cfb078bd5..e81f4a6d08ce 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -620,7 +620,7 @@
> > method = "smc";
> > };
> >
> > - soc: soc {
> > + soc: soc@0 {
> > #address-cells = <2>;
> > #size-cells = <2>;
> > ranges = <0 0 0 0 0x10 0>;
>
> So Amit Pundir noted that this patch is causing 5.4-rc to no longer
> boot on db845 w/ AOSP, due to it changing the userland sysfs paths
> from "/devices/platform/soc/1a00000.mdss" to
> "/devices/platform/soc@0/1a00000.mdss"
>
> Is there a better solution here that might not break userspace?

Other than doing the right thing of not relying on
/sys/devices/platform/* paths, implement per target/file DTC_FLAGS
similar to CFLAGS. There is another want for this in order to enable
dtc symbols for overlays on a per board basis.


Rob

\
 
 \ /
  Last update: 2022-09-17 16:06    [W:0.080 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site