lkml.org 
[lkml]   [2019]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] nvme-pci: Shutdown when removing dead controller
On Fri, Oct 04, 2019 at 11:36:42AM -0400, Tyler Ramer wrote:
> Here's a failure we had which represents the issue the patch is
> intended to solve:
>
> Aug 26 15:00:56 testhost kernel: nvme nvme4: async event result 00010300
> Aug 26 15:01:27 testhost kernel: nvme nvme4: controller is down; will
> reset: CSTS=0x3, PCI_STATUS=0x10
> Aug 26 15:02:10 testhost kernel: nvme nvme4: Device not ready; aborting reset
> Aug 26 15:02:10 testhost kernel: nvme nvme4: Removing after probe
> failure status: -19
>
> The CSTS warnings comes from nvme_timeout, and is printed by
> nvme_warn_reset. A reset then occurs
> Controller state should be NVME_CTRL_RESETTING
>
> Now, in nvme_reset_work, controller is never marked "CONNECTING" at:
>
> if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_CONNECTING))
>
> because several lines above, we can determine that
> nvme_pci_configure_admin_queues returns
> a bad result, which triggers a goto out_unlock and prints "removing
> after probe failure status: -19"
>
> Because state is never changed to NVME_CTRL_CONNECTING or
> NVME_CTRL_DELETING, the
> logic added in https://github.com/torvalds/linux/commit/2036f7263d70e67d70a67899a468588cb7356bc9
> should not apply.

Nor should it, because there are no IO in flight at this point, there
can't be any timeout work to check the state.

> We can further validate that dev->ctrl.state ==
> NVME_CTRL_RESETTING thanks to
> the WARN_ON in nvme_reset_work.

I'm not sure I see what this is fixing. Setting the shutdown to true is
usually just to get the queues flushed, but the nvme_kill_queues() that
we call accomplishes the same thing.

> On Thu, Oct 3, 2019 at 3:13 PM Tyler Ramer <tyaramer@gmail.com> wrote:
> >
> > Always shutdown the controller when nvme_remove_dead_controller is
> > reached.
> >
> > It's possible for nvme_remove_dead_controller to be called as part of a
> > failed reset, when there is a bad NVME_CSTS. The controller won't
> > be comming back online, so we should shut it down rather than just
> > disabling.
> >
> > Signed-off-by: Tyler Ramer <tyaramer@gmail.com>
> > ---
> > drivers/nvme/host/pci.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> > index c0808f9eb8ab..c3f5ba22c625 100644
> > --- a/drivers/nvme/host/pci.c
> > +++ b/drivers/nvme/host/pci.c
> > @@ -2509,7 +2509,7 @@ static void nvme_pci_free_ctrl(struct nvme_ctrl *ctrl)
> > static void nvme_remove_dead_ctrl(struct nvme_dev *dev)
> > {
> > nvme_get_ctrl(&dev->ctrl);
> > - nvme_dev_disable(dev, false);
> > + nvme_dev_disable(dev, true);
> > nvme_kill_queues(&dev->ctrl);
> > if (!queue_work(nvme_wq, &dev->remove_work))
> > nvme_put_ctrl(&dev->ctrl);
> > --
> > 2.23.0
> >

\
 
 \ /
  Last update: 2019-10-06 21:23    [W:1.028 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site