lkml.org 
[lkml]   [2019]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH 3/3] Revert "drm/sun4i: dsi: Rework a bit the hblk calculation"
From
Date
在 2019-10-06日的 22:44 +0800,Icenowy Zheng写道:
> 在 2019-10-03四的 09:53 +0530,Jagan Teki写道:
> > Hi Wens,
> >
> > On Tue, Oct 1, 2019 at 1:34 PM Icenowy Zheng <icenowy@aosc.io>
> > wrote:
> > > This reverts commit 62e7511a4f4dcf07f753893d3424decd9466c98b.
> > >
> > > This commit, although claimed as a refactor, in fact changed the
> > > formula.
> > >
> > > By expanding the original formula, we can find that the const 10
> > > is
> > > not
> > > substracted, instead it's added to the value (because 10 is
> > > negative
> > > when calculating hsa, and hsa itself is negative when calculating
> > > hblk).
> > > This breaks the similar pattern to other formulas, so restoring
> > > the
> > > original formula is more proper.
> > >
> > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > > ---
> > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 9 ++-------
> > > 1 file changed, 2 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > index 2d3e822a7739..cb5fd19c0d0d 100644
> > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > @@ -577,14 +577,9 @@ static void sun6i_dsi_setup_timings(struct
> > > sun6i_dsi *dsi,
> > > (mode->hsync_start - mode->hdisplay) *
> > > Bpp - HFP_PACKET_OVERHEAD);
> > >
> > > /*
> > > - * The blanking is set using a sync event (4
> > > bytes)
> > > - * and a blanking packet (4 bytes + payload + 2
> > > - * bytes). Its minimal size is therefore 10
> > > bytes.
> > > + * hblk seems to be the line + porches length.
> > > */
> > > -#define HBLK_PACKET_OVERHEAD 10
> > > - hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
> > > - (mode->htotal - (mode->hsync_end -
> > > mode-
> > > > hsync_start)) * Bpp -
> > > - HBLK_PACKET_OVERHEAD);
> > > + hblk = mode->htotal * Bpp - hsa;
> >
> > The original formula is correct according to BSP [1] and work with
> > my
> > panels which I have tested before. May be the horizontal timings on
> > panels you have leads to negative value.
>
> Do you tested the same timing with BSP kernel?
>
> It's quite difficult to get a negative value here, because the value
> is
> quite big (includes mode->hdisplay * Bpp).

By re-checking with the BSP source code, I found that the constant in
the HFP formula is indeed wrong -- it should be 16, not 6.

>
> Strangely, only change the formula here back makes the timing
> translated from FEX file works (tested on PineTab and PinePhone
> production ver). The translation rule is from [1].
>
> So I still insist on the patch because it's needed by experiment.
>
> [1] http://linux-sunxi.org/LCD
>
> > [1]
> > https://github.com/ayufan-pine64/linux-pine64/blob/my-hacks-1.2-with-drm/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L919

\
 
 \ /
  Last update: 2019-10-06 17:13    [W:0.104 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site