lkml.org 
[lkml]   [2019]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] thermal: brcmstb_thermal: Register different ops per process
Date
Since we do not have interrupts on BCM7216, we cannot have trip point
crossing, the thermal subsystem expects us to provide a NULL set_trips
operation in that case, so make it possible to provide per-process
thermal_zone_of_device_ops

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/thermal/broadcom/brcmstb_thermal.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 64f715053ce9..a75a335d1bb3 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -96,6 +96,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
struct brcmstb_thermal_params {
unsigned int offset;
unsigned int mult;
+ const struct thermal_zone_of_device_ops *of_ops;
};

struct brcmstb_thermal_priv {
@@ -278,19 +279,25 @@ static int brcmstb_set_trips(void *data, int low, int high)
return 0;
}

-static const struct thermal_zone_of_device_ops of_ops = {
+static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
.get_temp = brcmstb_get_temp,
- .set_trips = brcmstb_set_trips,
};

static const struct brcmstb_thermal_params brcmstb_16nm_params = {
.offset = 457829,
.mult = 557,
+ .of_ops = &brcmstb_16nm_of_ops,
+};
+
+static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
};

static const struct brcmstb_thermal_params brcmstb_28nm_params = {
.offset = 410040,
.mult = 487,
+ .of_ops = &brcmstb_28nm_of_ops,
};

static const struct of_device_id brcmstb_thermal_id_table[] = {
@@ -329,7 +336,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);

thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
- &of_ops);
+ priv->temp_params.of_ops);
if (IS_ERR(thermal)) {
ret = PTR_ERR(thermal);
dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
--
2.17.1
\
 
 \ /
  Last update: 2019-10-30 19:23    [W:0.228 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site