lkml.org 
[lkml]   [2019]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 084/129] md/raid1: fail run raid1 array when active disk less than one
Date
From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force

mdadm --zero /dev/sda
mdadm /dev/md1 -a /dev/sda

echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1

echo running > /sys/block/sdb/device/state
echo running > /sys/block/sdc/device/state
mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/raid1.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 53048bf0b2b81..9892c41de4419 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2960,6 +2960,13 @@ static int raid1_run(struct mddev *mddev)
!test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
test_bit(Faulty, &conf->mirrors[i].rdev->flags))
mddev->degraded++;
+ /*
+ * RAID1 needs at least one disk in active
+ */
+ if (conf->raid_disks - mddev->degraded < 1) {
+ ret = -EINVAL;
+ goto abort;
+ }

if (conf->raid_disks - mddev->degraded == 1)
mddev->recovery_cp = MaxSector;
@@ -2994,8 +3001,12 @@ static int raid1_run(struct mddev *mddev)
ret = md_integrity_register(mddev);
if (ret) {
md_unregister_thread(&mddev->thread);
- raid1_free(mddev, conf);
+ goto abort;
}
+ return 0;
+
+abort:
+ raid1_free(mddev, conf);
return ret;
}

--
2.20.1


\
 
 \ /
  Last update: 2019-10-03 18:04    [W:0.291 / U:9.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site