lkml.org 
[lkml]   [2019]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/32] mtd: spi-nor: Quad Enable and (un)lock methods
Date
From: Tudor Ambarus <tudor.ambarus@microchip.com>

Patches 1 - 20 are just clean up patches for the Flash Register
Operations.

Patches 21 - 32 deal with the Quad Enable and the (un)lock methods.
Fixed the clearing of QE bit on (un)lock() operations. Reworked the
Quad Enable methods and the disabling of the block write protection
at power-up.

Tested on s25fl116k and w25q128jv-q.

The patch set can be tested using mtd-utils:
1/ do a read-erase-write-read-back test immediately after boot, to check
the spi_nor_unlock_all() method. The focus is on the erase/write
methods, we want to see if the flash is unlocked at power-up.
mtd_debug read /dev/mtd-yours offset size read-file
hexdump read-file
mtd_debug erase /dev/mtd-yours offset size
dd if=/dev/urandom of=write-file bs=please-choose count=please-choose
mtd_debug write /dev/mtd-yours offset write-file-size write-file
mtd_debug read /dev/mtd-yours offset write-file-size read-file
sha1sum read-file write-file
2/ lock flash then try to erase/write it, to see if the lock works
flash_lock /dev/mtd-yours offset block-count
Do the read-erase-write-read-back test from 1/. The contents of
flash should not change in the erase and write steps.
3/ unlock flash and do the read-erase-write-read-back from 1/. The value of the
QEE should not change and you should be able to erase and write the flash.
Test 1/ should be successful.

v3: split patches, update retlen handling in sst_write.

v2:
- Introduce spi_nor_write_16bit_cr_and_check() as per Vignesh's suggestion. The
Configuration Register contains bits that can be updated in future: FREEZE,
CMP. Provide a generic method that allows updating all bits of the
Configuration Register.
- Fix SNOR_F_NO_READ_CR case in
"mtd: spi-nor: Rework the disabling of block write protection". When the flash
doesn't support the CR Read command, we make an assumption about the value of
the QE bit. In spi_nor_init(), call spi_nor_quad_enable() first, then
spi_nor_unlock_all(), so that at the spi_nor_unlock_all() time we can be sure
the QE bit has value one, because of the previous call to spi_nor_quad_enable().
- Fix if statement in spi_nor_write_sr_and_check():
if (nor->flags & SNOR_F_HAS_16BIT_SR)
- Fix documentation warnings.
- New patch: "mtd: spi-nor: Check all the bits written, not just the BP ones".
- Drop Global Unlock patches, will send them in a different patch set.

Tudor Ambarus (32):
mtd: spi-nor: Prepend spi_nor_ to all Reg Ops methods
mtd: spi-nor: Drop duplicated new line
mtd: spi-nor: Group all Reg Ops to avoid forward declarations
mtd: spi-nor: Stop compare with negative in Reg Ops methods
mtd: spi-nor: Drop explicit cast to int to already int value
mtd: spi-nor: Use dev_err() instead of pr_err()
mtd: spi-nor: Don't overwrite errno from Reg Ops
mtd: spi-nor: Pointer parameter for SR in spi_nor_read_sr()
mtd: spi-nor: Pointer parameter for FSR in spi_nor_read_fsr()
mtd: spi-nor: Pointer parameter for CR in spi_nor_read_cr()
mtd: spi-nor: Drop redundant error reports in Reg Ops callers
mtd: spi-nor: Void return type for spi_nor_clear_sr/fsr()
mtd: spi-nor: Print error messages inside Reg Ops methods
mtd: spi-nor: Fix retlen handling in sst_write()
mtd: spi-nor: Check for errors after each Register Operation
mtd: spi-nor: Rename label as it is no longer generic
mtd: spi-nor: Move the WE and wait calls inside Write SR methods
mtd: spi-nor: Constify data to write to the Status Register
mtd: spi-nor: Merge spi_nor_write_sr() and spi_nor_write_sr_cr()
mtd: spi-nor: Describe all the Reg Ops
mtd: spi-nor: Drop spansion_quad_enable()
mtd: spi-nor: Fix errno on Quad Enable methods
mtd: spi-nor: Check all the bits written, not just the BP ones
mtd: spi-nor: Print error message when the read back test fails
mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
mtd: spi-nor: Extend the QE Read Back test to the entire SR byte
mtd: spi-nor: Extend the QE Read Back test to both SR1 and SR2
mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1
mtd: spi-nor: Merge spansion Quad Enable methods
mtd: spi-nor: Rename macronix_quad_enable to
spi_nor_sr1_bit6_quad_enable
mtd: spi-nor: Prepend "spi_nor_" to "sr2_bit7_quad_enable"
mtd: spi-nor: Rework the disabling of block write protection

drivers/mtd/spi-nor/spi-nor.c | 1645 +++++++++++++++++++++++------------------
include/linux/mtd/spi-nor.h | 12 +-
2 files changed, 924 insertions(+), 733 deletions(-)

--
2.9.5

\
 
 \ /
  Last update: 2019-10-29 12:17    [W:0.696 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site