lkml.org 
[lkml]   [2019]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] 802.11n IBSS: wlan0 stops receiving packets due to aggregation after sender reboot
From
Date

On 29.10.19 10:03, Johannes Berg wrote:
> On Tue, 2019-10-29 at 09:41 +0100, Koen Vandeputte wrote:
>
>> I can confirm the issue as I'm also seeing this sometimes in the field here.
>>
>> Sometimes when a devices goes out of range and then re-enters,
>> the link refuses to "come up", as in rx looks to be "stuck" without any
>> reports in system log or locking issues (lockdep enabled)
> Right. I've recently debugged this due to issues in distributed
> beaconing (rather than moving in/out of range), but I guess it would be
> relatively simple to reproduce this with wmediumd, if that can be
> controlled dynamically?
>
> What kernel are you running? You could check if you have
>
> 95697f9907bf ("mac80211: accept deauth frames in IBSS mode")
> 4b08d1b6a994 ("mac80211: IBSS: send deauth when expiring inactive STAs")
>
> which might help somewhat, but don't fully cover the case of moving out
> of range.
>
> johannes
>
I'm running OpenWrt (kernel 4.14.150 with 4.19.79 mac80211)
I noticed these fixes last week and made a build 2 days ago with them
backported to it.
Running in the field on roughly 4 devices since a day.

Koen

\
 
 \ /
  Last update: 2019-10-29 10:48    [W:0.059 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site