lkml.org 
[lkml]   [2019]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
On Fri, Oct 18, 2019 at 05:39:14PM +0900, Yoshihiro Shimoda wrote:
> Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
> to json-schema.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 --------------
> .../devicetree/bindings/phy/renesas,usb3-phy.yaml | 80 ++++++++++++++++++++++
> 2 files changed, 80 insertions(+), 52 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> deleted file mode 100644
> index 0fe433b..00000000
> --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -* Renesas R-Car generation 3 USB 3.0 PHY
> -
> -This file provides information on what the device node for the R-Car generation
> -3 and RZ/G2 USB 3.0 PHY contain.
> -If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
> -instead of USB3_CLK. However, if you don't want to these features, you don't
> -need this driver.
> -
> -Required properties:
> -- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
> - SoC.
> - "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
> - SoC.
> - "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
> - SoC.
> - "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
> - SoC.
> - "renesas,r8a77965-usb3-phy" if the device is a part of an
> - R8A77965 SoC.
> - "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
> - compatible device.
> -
> - When compatible with the generic version, nodes must list the
> - SoC-specific version corresponding to the platform first
> - followed by the generic version.
> -
> -- reg: offset and length of the USB 3.0 PHY register block.
> -- clocks: A list of phandles and clock-specifier pairs.
> -- clock-names: Name of the clocks.
> - - The funcional clock must be "usb3-if".
> - - The usb3's external clock must be "usb3s_clk".
> - - The usb2's external clock must be "usb_extal". If you want to use the ssc,
> - the clock-frequency must not be 0.
> -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
> -
> -Optional properties:
> -- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
> - the following values as u32:
> - - 0 (or the property doesn't exist): disable the ssc
> - - 4980: enable the ssc as -4980 ppm
> - - 4492: enable the ssc as -4492 ppm
> - - 4003: enable the ssc as -4003 ppm
> -
> -Example (R-Car H3):
> -
> - usb-phy@e65ee000 {
> - compatible = "renesas,r8a7795-usb3-phy",
> - "renesas,rcar-gen3-usb3-phy";
> - reg = <0 0xe65ee000 0 0x90>;
> - clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
> - clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> - };
> diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> new file mode 100644
> index 00000000..42239e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car generation 3 USB 3.0 PHY
> +
> +maintainers:
> + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> +
> +properties:
> + compatible:
> + oneOf:

Don't need the oneOf here.

> + - items:
> + - enum:
> + - renesas,r8a774a1-usb3-phy # RZ/G2M
> + - renesas,r8a774b1-usb3-phy # RZ/G2N
> + - renesas,r8a7795-usb3-phy # R-Car H3
> + - renesas,r8a7796-usb3-phy # R-Car M3-W
> + - renesas,r8a77965-usb3-phy # R-Car M3-N
> + - const: renesas,rcar-gen3-usb3-phy
> +
> + reg:
> + # base address and length of the registers block for the PHY.
> + maxItems: 1
> +
> + clocks:
> + # A list of phandles and clock-specifier pairs.
> + maxItems: 3
> +
> + clock-names:
> + # If you want to use the ssc, the clock-frequency of usb_extal
> + # must not be 0.
> + maxItems: 3
> + items:
> + - const: usb3-if # The funcional clock
> + - const: usb3s_clk # The usb3's external clock
> + - const: usb_extal # The usb2's external clock
> +
> + '#phy-cells':
> + # see phy-bindings.txt in the same directory
> + const: 0
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + renesas,ssc-range:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Enable/disable spread spectrum clock (ssc) by using the following values
> + - 0 (or the property doesn't exist): disable the ssc
> + - 4980: enable the ssc as -4980 ppm
> + - 4492: enable the ssc as -4492 ppm
> + - 4003: enable the ssc as -4003 ppm

Make these values a schema. You'll need the $ref under an 'allOf' when
you do.

> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> +
> + usb-phy@e65ee000 {
> + compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
> + reg = <0 0xe65ee000 0 0x90>;
> + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
> + clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> + #phy-cells = <0>;
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-10-29 02:59    [W:0.054 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site