lkml.org 
[lkml]   [2019]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.3 013/197] ARM: dts: Fix gpio0 flags for am335x-icev2
    Date
    From: Tony Lindgren <tony@atomide.com>

    [ Upstream commit 4ef5d76b453908f21341e661a9b6f96862f6f589 ]

    The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
    the interconnect target module level for the modules that have it
    defined. Otherwise we get the following warnings:

    dts flag should be at module level for ti,no-idle-on-init
    dts flag should be at module level for ti,no-reset-on-init

    Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc")
    Cc: Lokesh Vutla <lokeshvutla@ti.com>
    Reported-by: Suman Anna <s-anna@ti.com>
    Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/am335x-icev2.dts | 2 +-
    arch/arm/boot/dts/am33xx-l4.dtsi | 2 +-
    2 files changed, 2 insertions(+), 2 deletions(-)

    diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
    index 18f70b35da4c7..204bccfcc110a 100644
    --- a/arch/arm/boot/dts/am335x-icev2.dts
    +++ b/arch/arm/boot/dts/am335x-icev2.dts
    @@ -432,7 +432,7 @@
    pinctrl-0 = <&mmc0_pins_default>;
    };

    -&gpio0 {
    +&gpio0_target {
    /* Do not idle the GPIO used for holding the VTT regulator */
    ti,no-reset-on-init;
    ti,no-idle-on-init;
    diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
    index 46849d6ecb3e2..1515f4f914999 100644
    --- a/arch/arm/boot/dts/am33xx-l4.dtsi
    +++ b/arch/arm/boot/dts/am33xx-l4.dtsi
    @@ -127,7 +127,7 @@
    ranges = <0x0 0x5000 0x1000>;
    };

    - target-module@7000 { /* 0x44e07000, ap 14 20.0 */
    + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
    compatible = "ti,sysc-omap2", "ti,sysc";
    ti,hwmods = "gpio1";
    reg = <0x7000 0x4>,
    --
    2.20.1


    \
     
     \ /
      Last update: 2019-10-27 22:32    [W:3.262 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site