lkml.org 
[lkml]   [2019]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: drivers/usb/usbip/stub_rx.c:505 stub_recv_cmd_submit() error: uninitialized symbol 'nents'.
On Thu, Oct 24, 2019 at 04:52:52PM -0600, shuah wrote:
> On 10/24/19 1:45 PM, Dan Carpenter wrote:
> > On Wed, Oct 23, 2019 at 04:11:20PM +0900, Suwan Kim wrote:
> > > On Tue, Oct 22, 2019 at 12:28:39PM +0300, Dan Carpenter wrote:
> > > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > > > head: 7d194c2100ad2a6dded545887d02754948ca5241
> > > > commit: ea44d190764b4422af4d1c29eaeb9e69e353b406 usbip: Implement SG support to vhci-hcd and stub driver
> > > > date: 7 weeks ago
> > > >
> > > > If you fix the issue, kindly add following tag
> > > > Reported-by: kbuild test robot <lkp@intel.com>
> > > > Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> > > >
> > > > New smatch warnings:
> > > > drivers/usb/usbip/stub_rx.c:505 stub_recv_cmd_submit() error: uninitialized symbol 'nents'.
> > > >
> > > > Old smatch warnings:
> > > > drivers/usb/usbip/stub_rx.c:450 stub_recv_xbuff() error: uninitialized symbol 'ret'.

Here, ret is not initialized, meaning priv->num_urbs is 0.
priv->urbs must be greater than zero.
priv->num_urbs = 0 means nents is 0 (line 505)

Dan, What is the relationship between old and new warnings?
priv->num_urbs is set as value of "num_urbs" at stub_recv_cmd_submit()
and "num_urbs" is initialized as 1 first. "num_urbs" will be reset
only at the place where smatch new warnings happened (line 505).

So, In my opinion, old smatch warnings should occur after the new
smatch warnings. Does this look right to you?

> > > > # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ea44d190764b4422af4d1c29eaeb9e69e353b406
> > > > git remote add linus https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > > > git remote update linus
> > > > git checkout ea44d190764b4422af4d1c29eaeb9e69e353b406
> > > > vim +/nents +505 drivers/usb/usbip/stub_rx.c
> > > >
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 453 static void stub_recv_cmd_submit(struct stub_device *sdev,
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 454 struct usbip_header *pdu)
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 455 {
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 456 struct stub_priv *priv;
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 457 struct usbip_device *ud = &sdev->ud;
> > > > 2d8f4595d1f275 drivers/staging/usbip/stub_rx.c Max Vozeler 2011-01-12 458 struct usb_device *udev = sdev->udev;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 459 struct scatterlist *sgl = NULL, *sg;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 460 void *buffer = NULL;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 461 unsigned long long buf_len;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 462 int nents;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 463 int num_urbs = 1;
> > > > c6688ef9f29762 drivers/usb/usbip/stub_rx.c Shuah Khan 2017-12-07 464 int pipe = get_pipe(sdev, pdu);
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 465 int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 466 int support_sg = 1;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 467 int np = 0;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 468 int ret, i;
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 469
> > > > 635f545a7e8be7 drivers/usb/usbip/stub_rx.c Shuah Khan 2017-12-07 470 if (pipe == -1)
> > > > 635f545a7e8be7 drivers/usb/usbip/stub_rx.c Shuah Khan 2017-12-07 471 return;
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 472
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 473 priv = stub_priv_alloc(sdev, pdu);
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 474 if (!priv)
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 475 return;
> > > > 4d7b5c7f8ad49b drivers/staging/usbip/stub_rx.c Takahiro Hirofuchi 2008-07-09 476
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 477 buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 478
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 479 /* allocate urb transfer buffer, if needed */
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 480 if (buf_len) {
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 481 if (use_sg) {
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 482 sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 483 if (!sgl)
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 484 goto err_malloc;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 485 } else {
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 486 buffer = kzalloc(buf_len, GFP_KERNEL);
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 487 if (!buffer)
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 488 goto err_malloc;
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 489 }
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 490 }
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 491
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 492 /* Check if the server's HCD supports SG */
> > > > ea44d190764b44 drivers/usb/usbip/stub_rx.c Suwan Kim 2019-08-28 493 if (use_sg && !udev->bus->sg_tablesize) {
> > > >
> > > > Smatch thinks "use_sg" can be true when "buf_len" is zero. It's hard
> > > > to tell if Smatch is right or wrong without more context...
> > >
> > > This is a bit strange. The meaning of "use_sg" is that client will
> > > use scatter-gather and client's urb->num_sgs is not zero. And buffer
> > > length should not be zero.
> > >
> > > usb_sg and buf_len are both client-dependent variables, so I think
> > > if they have wrong value in the server side, the client must have
> > > sent use_sg and buf_len with incorrect values.
> > >
> > > Did this error occur when compiling?
> >
> > Smatch is doing static analysis, yes.
> >
> > > If then, Did Smatch also consider vhci tx side?
> >
> > I'm not really sure... I can't reproduce the warning because on my
> > system Smatch doesn't parse usbip_recv() correctly so it ends up
> > silencing that warning. :/
> >
>
> Hi Suwan,
>
> This is a problem that needs fixing. nents
>
> /* allocate urb transfer buffer, if needed */
> if (buf_len) {
> if (use_sg) {
> sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
>
> nents gets initialized here by sgl_alloc()
>
> if (!sgl)
> goto err_malloc;
> } else {
> buffer = kzalloc(buf_len, GFP_KERNEL);
> if (!buffer)
> goto err_malloc;
> }
> }
>
> /* Check if the server's HCD supports SG */
> if (use_sg && !udev->bus->sg_tablesize) {
> /*
> * If the server's HCD doesn't support SG, break a single SG
> * request into several URBs and map each SG list entry to
> * corresponding URB buffer. The previously allocated SG
> * list is stored in priv->sgl (If the server's HCD support
> SG,
> * SG list is stored only in urb->sg) and it is used as an
> * indicator that the server split single SG request into
> * several URBs. Later, priv->sgl is used by stub_complete()
> and
> * stub_send_ret_submit() to reassemble the divied URBs.
> */
> support_sg = 0;
> num_urbs = nents;
>
> I think nents will be valid here. Is there need for this additional
> check here? You can fold this into the previous use_sg check, right
> after the sg_alloc() success, I would think.
>
> priv->completed_urbs = 0;
> pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
> }
>
>
> thanks,
> -- Shuah

I agree with you. Is it your intention to check as follows?

/* Check if the server's HCD supports SG */
if (use_sg && !nents && !udev->bus->sg_tablesize) {
^ Additinal check in here?

In my opinion, it would be nice to initialize nents to zero first,
and then check in the above if statement to see if nents was set
in sgl_free().

Regards,
Suwan Kim

\
 
 \ /
  Last update: 2019-10-26 04:42    [W:0.195 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site