lkml.org 
[lkml]   [2019]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/11] ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec
On Fri, Oct 18, 2019 at 01:18:39AM +0100, Srinivas Kandagatla wrote:
> This patch adds bindings for wcd9340/wcd9341 audio codec which can
> support both SLIMbus and I2S/I2C interface.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> .../bindings/sound/qcom,wcd934x.yaml | 169 ++++++++++++++++++
> 1 file changed, 169 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> new file mode 100644
> index 000000000000..299d6b96c339
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
> +
> +maintainers:
> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description: |
> + Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
> + It has in-built Soundwire controller, pin controller, interrupt mux and
> + supports both I2S/I2C and SLIMbus audio interfaces.
> +
> +properties:
> + compatible:
> + const: slim217,250
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + reset-gpios:
> + description: GPIO spec for reset line to use
> + maxItems: 1
> +
> + slim-ifc-dev:
> + description: SLIMBus Interface device phandle

phandle or...

> + maxItems: 1

array?

Needs a type if a phandle.

> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: extclk
> +
> + vdd-buck-supply:
> + description: A reference to the 1.8V buck supply
> +
> + vdd-buck-sido-supply:
> + description: A reference to the 1.8V SIDO buck supply
> +
> + vdd-rx-supply:
> + description: A reference to the 1.8V rx supply
> +
> + vdd-tx-supply:
> + description: A reference to the 1.8V tx supply
> +
> + vdd-vbat-supply:
> + description: A reference to the vbat supply
> +
> + vdd-io-supply:
> + description: A reference to the 1.8V I/O supply
> +
> + vdd-micbias-supply:
> + description: A reference to the micbias supply
> +
> + qcom,micbias1-millivolt:

The standard unit is '-microvolt'

> + description: Voltage betwee 1800mv-2850mv for micbias1 output

typo...

Sounds like constraints.

> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32

With standard units, you can drop the type.

> +
> + qcom,micbias2-millivolt:
> + description: Voltage betwee 1800mv-2850mv for micbias2 output
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + qcom,micbias3-millivolt:
> + description: Voltage betwee 1800mv-2850mv for micbias3 output
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + qcom,micbias4-millivolt:
> + description: Voltage betwee 1800mv-2850mv for micbias4 output
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + clock-output-names:
> + const: mclk
> +
> + clock-frequency:
> + description: Clock frequency of output clk in Hz
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 1
> +
> + '#clock-cells':
> + const: 0
> +
> + '#sound-dai-cells':
> + const: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> +patternProperties:
> + "^.*@[0-9a-f]+$":
> + type: object
> + description: |
> + WCD934x subnode for each slave devices. Bindings of each subnodes
> + depends on the specific driver providing the functionality and
> + documented in there respective bindings.

s/there/their/

> +
> + properties:
> + reg:
> + maxItems: 1
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - reset-gpios
> + - slim-ifc-dev
> + - interrupts
> + - interrupt-controller
> + - clock-frequency
> + - clock-output-names
> + - qcom,micbias1-millivolt
> + - qcom,micbias2-millivolt
> + - qcom,micbias3-millivolt
> + - qcom,micbias4-millivolt
> + - "#interrupt-cells"
> + - "#clock-cells"
> + - "#sound-dai-cells"
> + - "#address-cells"
> + - "#size-cells"
> +
> +examples:
> + - |
> + codec@1,0{
> + compatible = "slim217,250";
> + reg = <1 0>;
> + reset-gpios = <&tlmm 64 0>;
> + slim-ifc-dev = <&wcd9340_ifd>;
> + #sound-dai-cells = <1>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <54 4>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #clock-cells = <0>;
> + clock-frequency = <9600000>;
> + clock-output-names = "mclk";
> + qcom,micbias1-millivolt = <1800>;
> + qcom,micbias2-millivolt = <1800>;
> + qcom,micbias3-millivolt = <1800>;
> + qcom,micbias4-millivolt = <1800>;
> + clock-names = "extclk";
> + clocks = <&rpmhcc 2>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + wcdpinctrl@42 {
> + reg = <0x42 0x2>;
> + };
> + };
> +
> +...
> --
> 2.21.0
>

\
 
 \ /
  Last update: 2019-10-25 22:44    [W:0.151 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site