lkml.org 
[lkml]   [2019]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
On Wed, Oct 23, 2019 at 8:46 AM Johannes Weiner <hannes@cmpxchg.org> wrote:
>
> On Wed, Oct 23, 2019 at 08:40:12AM +0200, Michal Hocko wrote:
> > On Tue 22-10-19 19:37:08, Johannes Weiner wrote:
> > > While upgrading from 4.16 to 5.2, we noticed these allocation errors
> > > in the log of the new kernel:
> > >
> > > [ 8642.253395] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
> > > [ 8642.269170] cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
> > > [ 8642.293009] node 0: slabs: 5, objs: 170, free: 0
> > >
> > > slab_out_of_memory+1
> > > ___slab_alloc+969
> > > __slab_alloc+14
> > > kmem_cache_alloc+346
> > > inet_twsk_alloc+60
> > > tcp_time_wait+46
> > > tcp_fin+206
> > > tcp_data_queue+2034
> > > tcp_rcv_state_process+784
> > > tcp_v6_do_rcv+405
> > > __release_sock+118
> > > tcp_close+385
> > > inet_release+46
> > > __sock_release+55
> > > sock_close+17
> > > __fput+170
> > > task_work_run+127
> > > exit_to_usermode_loop+191
> > > do_syscall_64+212
> > > entry_SYSCALL_64_after_hwframe+68
> > >
> > > accompanied by an increase in machines going completely radio silent
> > > under memory pressure.
> >
> > This is really worrying because that suggests that something depends on
> > GFP_ATOMIC allocation which is fragile and broken.
>
> I don't think that is true. You cannot rely on a *single instance* of
> atomic allocations to succeed. But you have to be able to rely on that
> failure is temporary and there is a chance of succeeding eventually.
>
> Network is a good example. It retries transmits, but within reason. If
> you aren't able to process incoming packets for minutes, you might as
> well be dead.
>
> > > One thing that changed since 4.16 is e699e2c6a654 ("net, mm: account
> > > sock objects to kmemcg"), which made these slab caches subject to
> > > cgroup memory accounting and control.
> > >
> > > The problem with that is that cgroups, unlike the page allocator, do
> > > not maintain dedicated atomic reserves. As a cgroup's usage hovers at
> > > its limit, atomic allocations - such as done during network rx - can
> > > fail consistently for extended periods of time. The kernel is not able
> > > to operate under these conditions.
> > >
> > > We don't want to revert the culprit patch, because it indeed tracks a
> > > potentially substantial amount of memory used by a cgroup.
> > >
> > > We also don't want to implement dedicated atomic reserves for cgroups.
> > > There is no point in keeping a fixed margin of unused bytes in the
> > > cgroup's memory budget to accomodate a consumer that is impossible to
> > > predict - we'd be wasting memory and get into configuration headaches,
> > > not unlike what we have going with min_free_kbytes. We do this for
> > > physical mem because we have to, but cgroups are an accounting game.
> > >
> > > Instead, account these privileged allocations to the cgroup, but let
> > > them bypass the configured limit if they have to. This way, we get the
> > > benefits of accounting the consumed memory and have it exert pressure
> > > on the rest of the cgroup, but like with the page allocator, we shift
> > > the burden of reclaimining on behalf of atomic allocations onto the
> > > regular allocations that can block.
> >
> > On the other hand this would allow to break the isolation by an
> > unpredictable amount. Should we put a simple cap on how much we can go
> > over the limit. If the memcg limit reclaim is not able to keep up with
> > those overflows then even __GFP_ATOMIC allocations have to fail. What do
> > you think?
>
> I don't expect a big overrun in practice, and it appears that Google
> has been letting even NOWAIT allocations pass through without
> isolation issues.

We have been overcharging for __GFP_HIGH allocations for couple of
years and see no isolation issues in the production.

> Likewise, we have been force-charging the skmem for
> a while now and it hasn't been an issue for reclaim to keep up.
>
> My experience from production is that it's a whole lot easier to debug
> something like a memory.max overrun than it is to debug a machine that
> won't respond to networking. So that's the side I would err on.

\
 
 \ /
  Last update: 2019-10-23 19:39    [W:0.067 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site