lkml.org 
[lkml]   [2019]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/5] MIPS: ath79: ar9331: add ar9331-switch node
Date
Add switch node supported by dsa ar9331 driver.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/ar9331.dtsi | 127 ++++++++++++++++++-
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 13 ++
2 files changed, 139 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index e0f409dd6acf..84a177c0d053 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -158,6 +158,9 @@
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";

+ phy-mode = "mii";
+ phy-handle = <&phy_port4>;
+
status = "disabled";
};

@@ -165,13 +168,135 @@
compatible = "qca,ar9330-eth";
reg = <0x1a000000 0x200>;
interrupts = <5>;
-
resets = <&rst 13>, <&rst 23>;
reset-names = "mac", "mdio";
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";

+ phy-mode = "gmii";
+
status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch10: switch@10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qca,ar9331-switch";
+ reg = <0x10>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <12>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch_port0: port@0 {
+ reg = <0x0>;
+ label = "cpu";
+ ethernet = <&eth1>;
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch_port1: port@1 {
+ reg = <0x1>;
+ phy-handle = <&phy_port0>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port2: port@2 {
+ reg = <0x2>;
+ phy-handle = <&phy_port1>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port3: port@3 {
+ reg = <0x3>;
+ phy-handle = <&phy_port2>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port4: port@4 {
+ reg = <0x4>;
+ phy-handle = <&phy_port3>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port5: port@5 {
+ reg = <0x5>;
+ phy-handle = <&phy_port4>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&switch10>;
+
+ phy_port0: phy@0 {
+ reg = <0x0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port1: phy@1 {
+ reg = <0x1>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port2: phy@2 {
+ reg = <0x2>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port3: phy@3 {
+ reg = <0x3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port4: phy@4 {
+ reg = <0x4>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+ };
+ };
+ };
};

usb: usb@1b000100 {
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 77bab823eb3b..0f2b20044834 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -84,3 +84,16 @@
&eth1 {
status = "okay";
};
+
+&switch_port1 {
+ label = "lan0";
+ status = "okay";
+};
+
+&phy_port0 {
+ status = "okay";
+};
+
+&phy_port4 {
+ status = "okay";
+};
--
2.23.0
\
 
 \ /
  Last update: 2019-10-22 07:59    [W:0.094 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site