lkml.org 
[lkml]   [2019]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3
Hi,

On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote:
> On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel.org> wrote:
> > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote:
> > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial
> > > connections.
> > >
> > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > > ---
> > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++
> > > 1 file changed, 25 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > index 124b0b030b28..49c37b21ab36 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > @@ -56,6 +56,10 @@
> > > aliases {
> > > ethernet0 = &emac;
> > > serial0 = &uart0;
> > > + serial1 = &uart1;
> > > + serial2 = &uart2;
> > > + serial3 = &uart3;
> > > + serial4 = &uart4;
> > > };
> > >
> > > chosen {
> > > @@ -280,6 +284,27 @@
> > > };
> > > };
> > >
> > > +/* On Pi-2 connector */
> > > +&uart2 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&uart2_pins>;
> > > + status = "disabled";
> > > +};
> > > +
> > > +/* On Euler connector */
> > > +&uart3 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&uart3_pins>;
> > > + status = "disabled";
> > > +};
> > > +
> > > +/* On Euler connector, RTS/CTS optional */
> > > +&uart4 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&uart4_pins>;
> > > + status = "disabled";
> > > +};
> >
> > Since these are all the default muxing, maybe we should just set that
> > in the DTSI?
>
> Maybe not, since people may want to only use RX/TX, and leave the other
> two pins for GPIO?

Right, I'll apply that patch.

Thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-10-21 13:17    [W:1.654 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site