Messages in this thread | | | Subject | Re: [PATCH 1/2] arm64: dts: rockchip: Add core dts for RK3308 SOC | From | Andy Yan <> | Date | Mon, 21 Oct 2019 17:09:26 +0800 |
| |
Hi Heiko:
Thanks for your kindly review.
On 10/18/19 7:30 AM, Heiko Stuebner wrote: > Hi Andy, > > Am Donnerstag, 17. Oktober 2019, 05:04:49 CEST schrieb Andy Yan: > >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; > Please also provide a ATF implementation for the rk3308 :-) > [Not a requirement for getting this merged, but it would be > really cool to have sources for the full stack]
Tony's team has the plan to do it.
>> + >> + ramoops_mem: ramoops_mem { >> + reg = <0x0 0x110000 0x0 0xf0000>; >> + reg-names = "ramoops_mem"; >> + }; >> + >> + ramoops: ramoops { >> + compatible = "ramoops"; >> + record-size = <0x0 0x30000>; >> + console-size = <0x0 0xc0000>; >> + ftrace-size = <0x0 0x00000>; >> + pmsg-size = <0x0 0x00000>; >> + memory-region = <&ramoops_mem>; >> + }; > I think ramoops are more a per-board thing, like for the evb. > As they'll require cooperation with bootloaders to not mangle that > memory area. For this please also coordinate with Kever because > I somehow remember we have u-boot sometimes at 0x100000. > I removed it in V2. >> + grf: grf@ff000000 { >> + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; > Please add a patch adding the rockchip,rk3308-grf compatible to > Documentation/devicetree/bindings/soc/rockchip/grf.txt
Done
> >> + reg = <0x0 0xff000000 0x0 0x10000>; >> + >> + reboot-mode { >> + compatible = "syscon-reboot-mode"; >> + offset = <0x500>; >> + mode-bootloader = <BOOT_BL_DOWNLOAD>; >> + mode-loader = <BOOT_BL_DOWNLOAD>; >> + mode-normal = <BOOT_NORMAL>; >> + mode-recovery = <BOOT_RECOVERY>; >> + mode-fastboot = <BOOT_FASTBOOT>; >> + }; >> + }; >> + >> + detect_grf: syscon@ff00b000 { >> + compatible = "syscon", "simple-mfd"; > compatible = "rockchip,rk3308-detect-grf", "syscon" > + add the rk3308-detect-grf to the binding Done >> + reg = <0x0 0xff00b000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + }; >> + >> + core_grf: syscon@ff00c000 { >> + compatible = "syscon", "simple-mfd"; > same as detect_grf Done > >> + reg = <0x0 0xff00c000 0x0 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + }; >> + >> + i2c0: i2c@ff040000 { >> + compatible = "rockchip,rk3399-i2c"; > compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; > Same for all i2c controllers. Done > >> + reg = <0x0 0xff040000 0x0 0x1000>; >> + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; >> + clock-names = "i2c", "pclk"; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c0_xfer>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; > >> + spi0: spi@ff120000 { >> + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; >> + reg = <0x0 0xff120000 0x0 0x1000>; >> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; >> + clock-names = "spiclk", "apb_pclk"; >> + dmas = <&dmac0 0>, <&dmac0 1>; >> + dma-names = "tx", "rx"; >> + pinctrl-names = "default", "high_speed"; > there is no high_speed pinctrl defined for the Rockchip spi driver > in mainline, so this part should go away in a first step. > Same for the other spi controllers. > Removed >> + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; >> + pinctrl-1 = <&spi0_clk_hs &spi0_csn0 &spi0_miso_hs &spi0_mosi_hs>; >> + status = "disabled"; >> + }; > >> + rktimer: rktimer@ff1a0000 { >> + compatible = "rockchip,rk3288-timer"; > compatible = "rockchip,rk3308-timer", "rockchip,rk3288-timer"; Done > >> + reg = <0x0 0xff1a0000 0x0 0x20>; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; >> + clock-names = "pclk", "timer"; >> + }; > > >> + amba { >> + compatible = "arm,amba-bus"; > compatible = "simple-bus";
Done >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + dmac0: dma-controller@ff2c0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2c0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC0>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; > peripherals-req-type-burst is undocumented so likely some change to the > dma driver not yet upstream?
not upstream, so i remove it.
>> + }; >> + >> + dmac1: dma-controller@ff2d0000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x0 0xff2d0000 0x0 0x4000>; >> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + clocks = <&cru ACLK_DMAC1>; >> + clock-names = "apb_pclk"; >> + peripherals-req-type-burst; >> + }; >> + }; >> + >> + i2s_2ch_0: i2s@ff350000 { >> + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; >> + reg = <0x0 0xff350000 0x0 0x1000>; >> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; >> + clock-names = "i2s_clk", "i2s_hclk"; >> + dmas = <&dmac1 8>, <&dmac1 9>; >> + dma-names = "tx", "rx"; >> + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; >> + reset-names = "reset-m", "reset-h"; > These resets don't seem to be defined in driver or binding? > Same for other i2s
Remove in v2
> >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2s_2ch_0_sclk >> + &i2s_2ch_0_lrck >> + &i2s_2ch_0_sdi >> + &i2s_2ch_0_sdo>; >> + status = "disabled"; >> + }; > >> + >> + mac: ethernet@ff4e0000 { >> + compatible = "rockchip,rk3308-mac"; > Was this support to the network driver already submitted? > Because I wasn't able to find it in the gmac driver.
I remove mac in v2.
> >> + reg = <0x0 0xff4e0000 0x0 0x10000>; >> + rockchip,grf = <&grf>; >> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "macirq"; >> + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>, >> + <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>, >> + <&cru SCLK_MAC>, <&cru ACLK_MAC>, >> + <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>; >> + clock-names = "stmmaceth", "mac_clk_rx", >> + "mac_clk_tx", "clk_mac_ref", >> + "clk_mac_refout", "aclk_mac", >> + "pclk_mac", "clk_mac_speed"; >> + phy-mode = "rmii"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; >> + resets = <&cru SRST_MAC_A>; >> + reset-names = "stmmaceth"; >> + status = "disabled"; >> + }; > > Heiko > > > >
| |