lkml.org 
[lkml]   [2019]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[V2] dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platform
Date
Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below
registers(CHCFG0 - CHCFG15) of eDMA as follows:
*-----------------------------------------------------------*
| Offset | OTHERS | LS1028A |
|--------------|--------------------|-----------------------|
| 0x0 | CHCFG0 | CHCFG3 |
|--------------|--------------------|-----------------------|
| 0x1 | CHCFG1 | CHCFG2 |
|--------------|--------------------|-----------------------|
| 0x2 | CHCFG2 | CHCFG1 |
|--------------|--------------------|-----------------------|
| 0x3 | CHCFG3 | CHCFG0 |
|--------------|--------------------|-----------------------|
| ... | ...... | ...... |
|--------------|--------------------|-----------------------|
| 0xC | CHCFG12 | CHCFG15 |
|--------------|--------------------|-----------------------|
| 0xD | CHCFG13 | CHCFG14 |
|--------------|--------------------|-----------------------|
| 0xE | CHCFG14 | CHCFG13 |
|--------------|--------------------|-----------------------|
| 0xF | CHCFG15 | CHCFG12 |
*-----------------------------------------------------------*

This patch is to improve edma driver to fit LS1028A platform.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
Changed for V2:
- Explaining what's the "Our platforms"

drivers/dma/fsl-edma-common.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index b1a7ca9..611186b 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>

#include "fsl-edma-common.h"

@@ -42,6 +43,11 @@

#define EDMA_TCD 0x1000

+static struct soc_device_attribute soc_fixup_tuning[] = {
+ { .family = "QorIQ LS1028A"},
+ { },
+};
+
static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
{
struct edma_regs *regs = &fsl_chan->edma->regs;
@@ -109,10 +115,16 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
u32 ch = fsl_chan->vchan.chan.chan_id;
void __iomem *muxaddr;
unsigned int chans_per_mux, ch_off;
+ int endian_diff[4] = {3, 1, -1, -3};
u32 dmamux_nr = fsl_chan->edma->drvdata->dmamuxs;

chans_per_mux = fsl_chan->edma->n_chans / dmamux_nr;
ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+
+ if (!fsl_chan->edma->big_endian &&
+ soc_device_match(soc_fixup_tuning))
+ ch_off += endian_diff[ch_off % 4];
+
muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
slot = EDMAMUX_CHCFG_SOURCE(slot);

--
2.9.5
\
 
 \ /
  Last update: 2019-10-21 04:33    [W:0.032 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site