lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/4] ARM: dts: exynos: map 0x10000 SFR instead of 0x100 in DMC Exynos5422
On Wed, Oct 02, 2019 at 08:04:54AM +0200, Lukasz Luba wrote:
> There is a need to access registers at address offset near 0x10000.
> These registers are private DMC performance counters, which might be used
> as interrupt trigger when overflow. Potential usage is to skip polling
> in devfreq framework and switch to interrupt managed bandwidth control.
>
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 2 +-

Thanks, applied but re-ordered with previous one. Applying first
interrupts enables the interrupt mode which does not make sense without
extended mapping

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-10-02 19:29    [W:0.078 / U:14.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site