lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] drm/mcde: Fix Sphinx formatting
Date
- Format the pipe diagram as a monospace block.
- Fix formatting of the list. Without the empty line, the first dash is
not parsed as a bullet point.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index 9a09eba53182..c535abed4765 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -20,11 +20,11 @@
* input formats including most variants of RGB and YUV.
*
* The hardware has four display pipes, and the layout is a little
- * bit like this:
+ * bit like this::
*
- * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
- * External 0..5 0..3 A,B, 3 x DSI bridge
- * source 0..9 C0,C1 2 x DPI
+ * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
+ * External 0..5 0..3 A,B, 3 x DSI bridge
+ * source 0..9 C0,C1 2 x DPI
*
* FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for
* panels with embedded buffer.
@@ -43,6 +43,7 @@
* to change as we exploit more of the hardware capabilities.
*
* TODO:
+ *
* - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips()
* so we can selectively just transmit the damaged area to a
* command-only display.
--
2.20.1
\
 
 \ /
  Last update: 2019-10-02 17:40    [W:0.057 / U:35.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site