lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: i2c: at91: document optional bus recovery properties
Date
The at91 I2C controller can support bus recovery by re-assigning SCL
and SDA to gpios. Add the optional pinctrl and gpio properties to do
so.

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index b7cec17c3daf..8ea2ce5d8610 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -19,8 +19,13 @@ Optional properties:
capable I2C controllers.
- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
and "atmel,sama5d2-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
- Child nodes conforming to i2c bus binding

+
Examples :

i2c0: i2c@fff84000 {
@@ -55,6 +60,11 @@ i2c0: i2c@f8034600 {
clocks = <&flx0>;
atmel,fifo-size = <16>;
i2c-sda-hold-time-ns = <336>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;

wm8731: wm8731@1a {
compatible = "wm8731";
--
2.23.0
\
 
 \ /
  Last update: 2019-10-02 16:48    [W:0.112 / U:3.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site