lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/11] ARM: dts: sun8i: H3: Add Crypto Engine node
On Tue, Oct 01, 2019 at 08:41:35PM +0200, Corentin Labbe wrote:
> The Crypto Engine is a hardware cryptographic accelerator that supports
> many algorithms.
> It could be found on most Allwinner SoCs.
>
> This patch enables the Crypto Engine on the Allwinner H3 SoC Device-tree.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index e37c30e811d3..778a23a794c9 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -153,6 +153,17 @@
> allwinner,sram = <&ve_sram 1>;
> };
>
> + crypto: crypto@1c15000 {
> + compatible = "allwinner,sun8i-h3-crypto";
> + reg = <0x01c15000 0x1000>;
> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ce_ns";

That's not documented in the binding (and I guess unnecessary)

> + resets = <&ccu RST_BUS_CE>;
> + reset-names = "bus";
> + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> + clock-names = "bus", "mod";

Nit: we put the clocks before the resets usually

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-10-02 08:02    [W:0.074 / U:2.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site