lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional
Date
The chips have a 'start conversion' and a 'end of conversion' pair of
pins. They can be used but this is absolutely not mandatory as regular
polling is supported by the chip depending on its internal clocking
setup.

There is no physical reason to force the use of interrupts so turn
them optional.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Documentation/devicetree/bindings/iio/adc/max1027-adc.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
index e680c61dfb84..7b23d68f655c 100644
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -3,6 +3,8 @@
Required properties:
- compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
- reg: SPI chip select number for the device
+
+Optional properties:
- interrupts: IRQ line for the ADC
see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

--
2.20.1
\
 
 \ /
  Last update: 2019-10-02 14:31    [W:0.048 / U:36.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site