lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] iio: adc: max1027: Reset the device at probe time
Date
All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/iio/adc/max1027.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 823223b77a70..f9b473ee6711 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -466,6 +466,14 @@ static int max1027_probe(struct spi_device *spi)
}
}

+ /* Internal reset */
+ st->reg = MAX1027_RST_REG;
+ ret = spi_write(st->spi, &st->reg, 1);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
+ return ret;
+ }
+
/* Disable averaging */
st->reg = MAX1027_AVG_REG;
ret = spi_write(st->spi, &st->reg, 1);
--
2.20.1
\
 
 \ /
  Last update: 2019-10-02 14:31    [W:0.045 / U:16.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site