lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/11] ARM: dts: sun8i: H3: Add Crypto Engine node
On Wed, Oct 02, 2019 at 08:02:14AM +0200, Maxime Ripard wrote:
> On Tue, Oct 01, 2019 at 08:41:35PM +0200, Corentin Labbe wrote:
> > The Crypto Engine is a hardware cryptographic accelerator that supports
> > many algorithms.
> > It could be found on most Allwinner SoCs.
> >
> > This patch enables the Crypto Engine on the Allwinner H3 SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > arch/arm/boot/dts/sun8i-h3.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > index e37c30e811d3..778a23a794c9 100644
> > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > @@ -153,6 +153,17 @@
> > allwinner,sram = <&ve_sram 1>;
> > };
> >
> > + crypto: crypto@1c15000 {
> > + compatible = "allwinner,sun8i-h3-crypto";
> > + reg = <0x01c15000 0x1000>;
> > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "ce_ns";
>
> That's not documented in the binding (and I guess unnecessary)
>

Hello

Yes this should be removed.

> > + resets = <&ccu RST_BUS_CE>;
> > + reset-names = "bus";
> > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> > + clock-names = "bus", "mod";
>
> Nit: we put the clocks before the resets usually
>

Will do it.

Thanks
Regards

\
 
 \ /
  Last update: 2019-10-02 10:45    [W:0.046 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site