lkml.org 
[lkml]   [2019]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC][PATCH] dt-bindings: usb: rt1711h: Add connector bindings
Date
Add connector binding documentation for Richtek RT1711H Type-C
chip driver

It was noted by Rob Herring that the rt1711h binding docs
doesn't include the connector binding.

Thus this patch adds such documentation following the details
in Documentation/devicetree/bindings/usb/typec-tcpci.txt

CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
.../bindings/usb/richtek,rt1711h.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index d4cf53c071d9..e3fc57e605ed 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -6,10 +6,39 @@ Required properties:
- interrupts : <a b> where a is the interrupt number and b represents an
encoding of the sense and level information for the interrupt.

+Required sub-node:
+- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
+ of connector node are specified in
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
Example :
rt1711h@4e {
compatible = "richtek,rt1711h";
reg = <0x4e>;
interrupt-parent = <&gpio26>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 12000, 2000)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&usb3_data_ss>;
+ };
+ };
+ };
+ };
};
--
2.17.1
\
 
 \ /
  Last update: 2019-10-03 05:23    [W:0.049 / U:13.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site