lkml.org 
[lkml]   [2019]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 4/8] dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI
Date
Hi Rob,

Thank you so much for the review.
Please find my comments inline below.

Thanks,
Manish

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Thursday, October 17, 2019 11:53 PM
> To: Manish Narani <MNARANI@xilinx.com>
> Cc: ulf.hansson@linaro.org; mark.rutland@arm.com; adrian.hunter@intel.com;
> Michal Simek <michals@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>; Rajan
> Vaja <RAJANV@xilinx.com>; Nava kishore Manne <navam@xilinx.com>;
> mdf@kernel.org; linux-mmc@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; git
> <git@xilinx.com>
> Subject: Re: [PATCH v3 4/8] dt-bindings: mmc: arasan: Add optional properties
> for Arasan SDHCI
>
> On Thu, Oct 17, 2019 at 11:51:46AM +0530, Manish Narani wrote:
> > Add optional propeties for Arasan SDHCI which are used to set clk delays
>
> properties
>
> > for different speed modes in the controller.
> >
> > Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> > ---
> > .../devicetree/bindings/mmc/arasan,sdhci.txt | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> > index b51e40b2e0c5..e0369dd7fb18 100644
> > --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> > +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> > @@ -46,6 +46,21 @@ Optional Properties:
> > properly. Test mode can be used to force the controller to function.
> > - xlnx,int-clock-stable-broken: when present, the controller always reports
> > that the internal clock is stable even when it is not.
> > + - clk-phase-legacy: Input/Output Clock Delay pair in degrees for Legacy
> Mode.
> > + - clk-phase-mmc-hs: Input/Output Clock Delay pair degrees for MMC HS.
> > + - clk-phase-sd-hs: Input/Output Clock Delay pair in degrees for SD HS.
> > + - clk-phase-uhs-sdr12: Input/Output Clock Delay pair in degrees for SDR12.
> > + - clk-phase-uhs-sdr25: Input/Output Clock Delay pair in degrees for SDR25.
> > + - clk-phase-uhs-sdr50: Input/Output Clock Delay pair in degrees for SDR50.
> > + - clk-phase-uhs-sdr104: Input/Output Clock Delay pair in degrees for
> SDR104.
> > + - clk-phase-uhs-ddr50: Input/Output Clock Delay pair in degrees for SD
> DDR50.
> > + - clk-phase-mmc-ddr52: Input/Output Clock Delay pair in degrees for MMC
> DDR52.
> > + - clk-phase-mmc-hs200: Input/Output Clock Delay pair in degrees for MMC
> HS200.
> > + - clk-phase-mmc-hs400: Input/Output Clock Delay pair in degrees for MMC
> HS400.
>
> Should be common?
Yes, these properties should be common.

>
> Range of values?
As these values are in degrees, the range of values is 0 to 359 degrees.

Thanks,
Manish

\
 
 \ /
  Last update: 2019-10-18 11:06    [W:0.059 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site