lkml.org 
[lkml]   [2019]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] clk: meson: a1: add support for Amlogic A1 clock driver
Date
The Amlogic A1 clock includes three drivers:
peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.

Unlike the previous series, there is no EE/AO domain
in A1 CLK controllers.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
drivers/clk/meson/Kconfig | 10 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/a1-pll.c | 345 +++++++
drivers/clk/meson/a1-pll.h | 56 ++
drivers/clk/meson/a1.c | 2264 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/a1.h | 120 +++
6 files changed, 2796 insertions(+)
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index dabeb43..c2809b2 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -93,6 +93,16 @@ config COMMON_CLK_AXG_AUDIO
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.

+config COMMON_CLK_A1
+ bool
+ depends on ARCH_MESON
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_DUALDIV
+ select COMMON_CLK_MESON_PLL
+ help
+ Support for the clock controller on Amlogic A113L device,
+ aka a1. Say Y if you want peripherals to work.
+
config COMMON_CLK_G12A
bool
depends on ARCH_MESON
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 3939f21..28cbae1 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o

obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_A1) += a1-pll.o a1.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
new file mode 100644
index 0000000..486d964
--- /dev/null
+++ b/drivers/clk/meson/a1-pll.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include "clk-pll.h"
+#include "meson-eeclk.h"
+#include "a1-pll.h"
+
+static struct clk_regmap a1_fixed_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_FIXPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll_dco",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_fixpll",
+ .name = "xtal_fixpll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fixed_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fixed_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is fclk_div2/3/4's parent,
+ * However, fclk_div2/3/5 feeds AXI/APB/DDR.
+ * It is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static const struct pll_mult_range a1_hifi_pll_mult_range = {
+ .min = 32,
+ .max = 64,
+};
+
+static const struct reg_sequence a1_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x11f18440, .delay_us = 10 },
+ { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x15f18440, .delay_us = 40 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001140 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
+};
+
+static struct clk_regmap a1_hifi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .range = &a1_hifi_pll_mult_range,
+ .init_regs = a1_hifi_init_regs,
+ .init_count = ARRAY_SIZE(a1_hifi_init_regs),
+ .strict_sequence = true,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xtal_fixpll",
+ .name = "xtal_fixpll",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock in BL2 firmware
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by AXI bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor a1_fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data a1_pll_hw_onecell_data = {
+ .hws = {
+ [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
+ [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
+ [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
+ [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
+ [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
+ [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
+ [NR_PLL_CLKS] = NULL,
+ },
+ .num = NR_PLL_CLKS,
+};
+
+static struct clk_regmap *const a1_pll_regmaps[] = {
+ &a1_fixed_pll_dco,
+ &a1_fixed_pll,
+ &a1_hifi_pll,
+ &a1_fclk_div2,
+ &a1_fclk_div3,
+ &a1_fclk_div5,
+ &a1_fclk_div7,
+};
+
+static int meson_a1_pll_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = meson_eeclkc_probe(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct meson_eeclkc_data a1_pll_data = {
+ .regmap_clks = a1_pll_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(a1_pll_regmaps),
+ .hw_onecell_data = &a1_pll_hw_onecell_data,
+};
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a1-pll-clkc",
+ .data = &a1_pll_data
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver a1_driver = {
+ .probe = meson_a1_pll_probe,
+ .driver = {
+ .name = "a1-pll-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_driver);
diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
new file mode 100644
index 0000000..99ee2a9
--- /dev/null
+++ b/drivers/clk/meson/a1-pll.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_PLL_H
+#define __A1_PLL_H
+
+/* PLL register offset */
+#define ANACTRL_FIXPLL_CTRL0 0x80
+#define ANACTRL_FIXPLL_CTRL1 0x84
+#define ANACTRL_FIXPLL_CTRL2 0x88
+#define ANACTRL_FIXPLL_CTRL3 0x8c
+#define ANACTRL_FIXPLL_CTRL4 0x90
+#define ANACTRL_FIXPLL_STS 0x94
+#define ANACTRL_SYSPLL_CTRL0 0x100
+#define ANACTRL_SYSPLL_CTRL1 0x104
+#define ANACTRL_SYSPLL_CTRL2 0x108
+#define ANACTRL_SYSPLL_CTRL3 0x10c
+#define ANACTRL_SYSPLL_CTRL4 0x110
+#define ANACTRL_SYSPLL_STS 0x114
+#define ANACTRL_HIFIPLL_CTRL0 0x140
+#define ANACTRL_HIFIPLL_CTRL1 0x144
+#define ANACTRL_HIFIPLL_CTRL2 0x148
+#define ANACTRL_HIFIPLL_CTRL3 0x14c
+#define ANACTRL_HIFIPLL_CTRL4 0x150
+#define ANACTRL_HIFIPLL_STS 0x154
+#define ANACTRL_AUDDDS_CTRL0 0x180
+#define ANACTRL_AUDDDS_CTRL1 0x184
+#define ANACTRL_AUDDDS_CTRL2 0x188
+#define ANACTRL_AUDDDS_CTRL3 0x18c
+#define ANACTRL_AUDDDS_CTRL4 0x190
+#define ANACTRL_AUDDDS_STS 0x194
+#define ANACTRL_MISCTOP_CTRL0 0x1c0
+#define ANACTRL_POR_CNTL 0x208
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_FIXED_PLL_DCO 0
+#define CLKID_FCLK_DIV2_DIV 2
+#define CLKID_FCLK_DIV3_DIV 3
+#define CLKID_FCLK_DIV5_DIV 4
+#define CLKID_FCLK_DIV7_DIV 5
+#define NR_PLL_CLKS 11
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/a1-pll-clkc.h>
+
+#endif /* __A1_PLL_H */
diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
new file mode 100644
index 0000000..86a4733
--- /dev/null
+++ b/drivers/clk/meson/a1.c
@@ -0,0 +1,2264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include "clk-pll.h"
+#include "clk-dualdiv.h"
+#include "meson-eeclk.h"
+#include "a1.h"
+
+/* PLLs clock in gates, its parent is xtal */
+static struct clk_regmap a1_xtal_clktree = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_clktree",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ /*
+ * switch for xtal clock
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap a1_xtal_fixpll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_fixpll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL,
+ /*
+ * it feeds DDR,AXI,APB bus
+ * Linux should not change it at runtime
+ */
+ },
+};
+
+static struct clk_regmap a1_xtal_usb_phy = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 2,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_usb_phy",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_xtal_usb_ctrl = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 3,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_usb_ctrl",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_xtal_hifipll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_hifipll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_xtal_syspll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 5,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_syspll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_xtal_dds = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_OSCIN_CTRL,
+ .bit_idx = 6,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "xtal_dds",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct clk_parent_data sys_clk_parents[] = {
+ { .fw_name = "xtal" },
+ { .fw_name = "fclk_div2"},
+ { .fw_name = "fclk_div3"},
+ { .fw_name = "fclk_div5"},
+};
+
+static struct clk_regmap a1_sys_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SYS_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_b_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = sys_clk_parents,
+ .num_parents = ARRAY_SIZE(sys_clk_parents),
+ },
+};
+
+static struct clk_regmap a1_sys_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SYS_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sys_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_sys_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sys_b_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_regmap a1_sys_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SYS_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_a_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = sys_clk_parents,
+ .num_parents = ARRAY_SIZE(sys_clk_parents),
+ },
+};
+
+static struct clk_regmap a1_sys_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SYS_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sys_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_sys_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SYS_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sys_a_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by APB bus which setted in Romcode
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_regmap a1_sys_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SYS_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sys_a.hw, &a1_sys_b.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* rtc 32k clock in */
+static struct clk_regmap a1_rtc_32k_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct meson_clk_dualdiv_param a1_32k_div_table[] = {
+ {
+ .dual = 1,
+ .n1 = 733,
+ .m1 = 8,
+ .n2 = 732,
+ .m2 = 11,
+ }, {}
+};
+
+static struct clk_regmap a1_rtc_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = RTC_BY_OSCIN_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = RTC_BY_OSCIN_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = a1_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_rtc_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_rtc_32k_xtal = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = RTC_BY_OSCIN_CTRL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_xtal",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_rtc_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static u32 rtc_32k_sel[] = { 0, 1 };
+
+static struct clk_regmap a1_rtc_32k_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = RTC_CTRL,
+ .mask = 0x3,
+ .shift = 0,
+ .table = rtc_32k_sel,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_32k_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_rtc_32k_xtal.hw,
+ &a1_rtc_32k_div.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+struct clk_regmap a1_rtc_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "rtc_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_rtc_32k_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* dsp a clk */
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_clk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "hifi_pll", },
+ { .hw = &a1_rtc_clk.hw },
+};
+
+static struct clk_regmap a1_dspa_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspa_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPA_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspa_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPA_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPA_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspa_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_dspa_a.hw },
+ { .hw = &a1_dspa_b.hw },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspa_en_dspa = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_EN,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_en_dspa",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspa_en_nic = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPA_CLK_EN,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspa_en_nic",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspa_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+/* dsp b clk */
+static struct clk_regmap a1_dspb_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 10,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspb_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPB_CLK_CTRL0,
+ .shift = 0,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_CTRL0,
+ .bit_idx = 13,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x7,
+ .shift = 26,
+ .table = mux_table_dsp_ab,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsp_ab_clk_parent_data,
+ .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_dspb_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DSPB_CLK_CTRL0,
+ .shift = 16,
+ .width = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_CTRL0,
+ .bit_idx = 29,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DSPB_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dspb_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_a.hw, &a1_dspb_b.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dspb_en_dspb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_EN,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_en_dspb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap a1_dspb_en_nic = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DSPB_CLK_EN,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dspb_en_nic",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dspb_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+/* 12M/24M clock */
+static struct clk_regmap a1_24m = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "24m",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor a1_24m_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "24m_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_24m.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_12m = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 10,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "12m",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_24m_div2.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2_divn_pre = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = CLK12_24_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_divn_pre",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fclk_div2",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_fclk_div2_divn = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 12,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_divn",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_fclk_div2_divn_pre.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* gen clk */
+/*
+ * the second parent is sys_pll_div16, it will complete in the CPU clock,
+ * the forth parent is the clock measurement source, it relies on
+ * the clock measurement register configuration.
+ */
+static u32 gen_clk_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_clk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_rtc_clk.hw },
+ { .fw_name = "hifi_pll", },
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap a1_gen_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = GEN_CLK_CTRL,
+ .mask = 0xf,
+ .shift = 12,
+ .table = gen_clk_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gen_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = gen_clk_parent_data,
+ .num_parents = ARRAY_SIZE(gen_clk_parent_data),
+ },
+};
+
+static struct clk_regmap a1_gen_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = GEN_CLK_CTRL,
+ .shift = 0,
+ .width = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gen_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_gen_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_gen = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = GEN_CLK_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gen",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_gen_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_saradc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw, },
+ },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap a1_saradc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_saradc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_saradc_clk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SAR_ADC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "saradc_clk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_saradc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm a/b/c/d parent data */
+static const struct clk_parent_data pwm_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw },
+};
+
+/* pwm a clk */
+static struct clk_regmap a1_pwm_a_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_a_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_a = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_a_div.hw
+ },
+ .num_parents = 1,
+ /*
+ * The CPU working voltage is controlled by pwm_a
+ * in BL2 firmware. add the CLK_IGNORE_UNUSED flag
+ * to avoid changing at runtime.
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
+/* pwm b clk */
+static struct clk_regmap a1_pwm_b_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .mask = 0x1,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_b_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_b = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_AB_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm c clk */
+static struct clk_regmap a1_pwm_c_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_c_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_c_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_c_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_c = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_c",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_c_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm d clk */
+static struct clk_regmap a1_pwm_d_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .mask = 0x1,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_d_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_d_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_d_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_d = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_CD_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_d",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_d_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data pwm_ef_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw },
+ { .fw_name = "fclk_div5", },
+ { .hw = &a1_rtc_clk.hw },
+};
+
+/* pwm e clk */
+static struct clk_regmap a1_pwm_e_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_ef_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_ef_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_e_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_e_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_e_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_e = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_e",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_e_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* pwm f clk */
+static struct clk_regmap a1_pwm_f_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = pwm_ef_parent_data,
+ .num_parents = ARRAY_SIZE(pwm_ef_parent_data),
+ },
+};
+
+static struct clk_regmap a1_pwm_f_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .shift = 16,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "pwm_f_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_f_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_pwm_f = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PWM_CLK_EF_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "pwm_f",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_pwm_f_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* spicc clk */
+
+/* div2 |\ |\ _____
+ * ---------| |---DIV--| | | | spicc out
+ * ---------| | | |-----|GATE |---------
+ * ..... |/ | / |_____|
+ * --------------------|/
+ * 24M
+ */
+static const struct clk_parent_data spicc_parents[] = {
+ { .fw_name = "fclk_div2"},
+ { .fw_name = "fclk_div3"},
+ { .fw_name = "fclk_div5"},
+ { .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap a1_spicc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SPICC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spicc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_spicc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SPICC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_spicc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_spicc_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SPICC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_spicc_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_spicc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SPICC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_spicc_sel2.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* ts clk */
+static struct clk_regmap a1_ts_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = TS_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ts_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_ts = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = TS_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ts",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_ts_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* spifc clk */
+static struct clk_regmap a1_spifc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SPIFC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spifc_sel",
+ .ops = &clk_regmap_mux_ops,
+ /* the same parent with spicc */
+ .parent_data = spicc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_spifc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SPIFC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spifc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_spifc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_spifc_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SPIFC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spifc_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_spifc_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_spifc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SPIFC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spifc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_spifc_sel2.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* usb bus clk */
+static const struct clk_parent_data usb_bus_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &a1_sys_clk.hw },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap a1_usb_bus_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = USB_BUSCLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "usb_bus_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = usb_bus_parent_data,
+ .num_parents = ARRAY_SIZE(usb_bus_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_usb_bus_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = USB_BUSCLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "usb_bus_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_usb_bus_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_usb_bus = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = USB_BUSCLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "usb_bus",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_usb_bus_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* sd emmc clk */
+static const struct clk_parent_data sd_emmc_parents[] = {
+ { .fw_name = "fclk_div2", },
+ { .fw_name = "fclk_div3", },
+ { .fw_name = "fclk_div5", },
+ { .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap a1_sd_emmc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SD_EMMC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = sd_emmc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_sd_emmc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = SD_EMMC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sd_emmc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_sd_emmc_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = SD_EMMC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_sd_emmc_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_sd_emmc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = SD_EMMC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_sd_emmc_sel2.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_psram_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PSRAM_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "psram_sel",
+ .ops = &clk_regmap_mux_ops,
+ /* the same parent with sd_emmc */
+ .parent_data = sd_emmc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_psram_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = PSRAM_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "psram_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_psram_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_psram_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = PSRAM_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "psram_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_psram_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_psram = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = PSRAM_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "psram",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_psram_sel2.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* dmc clk */
+static struct clk_regmap a1_dmc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DMC_CLK_CTRL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = sd_emmc_parents,
+ .num_parents = 4,
+ },
+};
+
+static struct clk_regmap a1_dmc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = DMC_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dmc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dmc_sel2 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = DMC_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dmc_sel2",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &a1_dmc_div.hw },
+ { .fw_name = "xtal", },
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_dmc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = DMC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dmc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_dmc_sel2.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock is used by DDR clock which setted in BL2
+ * and is required by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+ },
+};
+
+/* cec A clock */
+static struct clk_regmap a1_ceca_32k_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CECA_CLK_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ceca_32k_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_ceca_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = CECA_CLK_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = CECA_CLK_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = CECA_CLK_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = CECA_CLK_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = CECA_CLK_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = a1_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_ceca_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_ceca_32k_sel_pre = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CECA_CLK_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_sel_pre",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_ceca_32k_div.hw,
+ &a1_ceca_32k_clkin.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_ceca_32k_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CECA_CLK_CTRL1,
+ .mask = 0x1,
+ .shift = 31,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_ceca_32k_sel_pre.hw,
+ &a1_rtc_clk.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_ceca_32k_clkout = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CECA_CLK_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "ceca_32k_clkout",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_ceca_32k_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* cec B clock */
+static struct clk_regmap a1_cecb_32k_clkin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CECB_CLK_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cecb_32k_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_cecb_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = CECB_CLK_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = CECB_CLK_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = CECB_CLK_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = CECB_CLK_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = CECB_CLK_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = a1_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_cecb_32k_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap a1_cecb_32k_sel_pre = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CECB_CLK_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_sel_pre",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_cecb_32k_div.hw,
+ &a1_cecb_32k_clkin.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_cecb_32k_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = CECB_CLK_CTRL1,
+ .mask = 0x1,
+ .shift = 31,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_cecb_32k_sel_pre.hw,
+ &a1_rtc_clk.hw,
+ },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap a1_cecb_32k_clkout = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = CECB_CLK_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cecb_32k_clkout",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &a1_cecb_32k_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+ MESON_PCLK(_name, _reg, _bit, &a1_sys_clk.hw)
+
+static MESON_GATE(a1_clk_tree, SYS_CLK_EN0, 0);
+static MESON_GATE(a1_reset_ctrl, SYS_CLK_EN0, 1);
+static MESON_GATE(a1_analog_ctrl, SYS_CLK_EN0, 2);
+static MESON_GATE(a1_pwr_ctrl, SYS_CLK_EN0, 3);
+static MESON_GATE(a1_pad_ctrl, SYS_CLK_EN0, 4);
+static MESON_GATE(a1_sys_ctrl, SYS_CLK_EN0, 5);
+static MESON_GATE(a1_temp_sensor, SYS_CLK_EN0, 6);
+static MESON_GATE(a1_am2axi_dev, SYS_CLK_EN0, 7);
+static MESON_GATE(a1_spicc_b, SYS_CLK_EN0, 8);
+static MESON_GATE(a1_spicc_a, SYS_CLK_EN0, 9);
+static MESON_GATE(a1_clk_msr, SYS_CLK_EN0, 10);
+static MESON_GATE(a1_audio, SYS_CLK_EN0, 11);
+static MESON_GATE(a1_jtag_ctrl, SYS_CLK_EN0, 12);
+static MESON_GATE(a1_saradc, SYS_CLK_EN0, 13);
+static MESON_GATE(a1_pwm_ef, SYS_CLK_EN0, 14);
+static MESON_GATE(a1_pwm_cd, SYS_CLK_EN0, 15);
+static MESON_GATE(a1_pwm_ab, SYS_CLK_EN0, 16);
+static MESON_GATE(a1_cec, SYS_CLK_EN0, 17);
+static MESON_GATE(a1_i2c_s, SYS_CLK_EN0, 18);
+static MESON_GATE(a1_ir_ctrl, SYS_CLK_EN0, 19);
+static MESON_GATE(a1_i2c_m_d, SYS_CLK_EN0, 20);
+static MESON_GATE(a1_i2c_m_c, SYS_CLK_EN0, 21);
+static MESON_GATE(a1_i2c_m_b, SYS_CLK_EN0, 22);
+static MESON_GATE(a1_i2c_m_a, SYS_CLK_EN0, 23);
+static MESON_GATE(a1_acodec, SYS_CLK_EN0, 24);
+static MESON_GATE(a1_otp, SYS_CLK_EN0, 25);
+static MESON_GATE(a1_sd_emmc_a, SYS_CLK_EN0, 26);
+static MESON_GATE(a1_usb_phy, SYS_CLK_EN0, 27);
+static MESON_GATE(a1_usb_ctrl, SYS_CLK_EN0, 28);
+static MESON_GATE(a1_sys_dspb, SYS_CLK_EN0, 29);
+static MESON_GATE(a1_sys_dspa, SYS_CLK_EN0, 30);
+static MESON_GATE(a1_dma, SYS_CLK_EN0, 31);
+static MESON_GATE(a1_irq_ctrl, SYS_CLK_EN1, 0);
+static MESON_GATE(a1_nic, SYS_CLK_EN1, 1);
+static MESON_GATE(a1_gic, SYS_CLK_EN1, 2);
+static MESON_GATE(a1_uart_c, SYS_CLK_EN1, 3);
+static MESON_GATE(a1_uart_b, SYS_CLK_EN1, 4);
+static MESON_GATE(a1_uart_a, SYS_CLK_EN1, 5);
+static MESON_GATE(a1_sys_psram, SYS_CLK_EN1, 6);
+static MESON_GATE(a1_rsa, SYS_CLK_EN1, 8);
+static MESON_GATE(a1_coresight, SYS_CLK_EN1, 9);
+static MESON_GATE(a1_am2axi_vad, AXI_CLK_EN, 0);
+static MESON_GATE(a1_audio_vad, AXI_CLK_EN, 1);
+static MESON_GATE(a1_axi_dmc, AXI_CLK_EN, 3);
+static MESON_GATE(a1_axi_psram, AXI_CLK_EN, 4);
+static MESON_GATE(a1_ramb, AXI_CLK_EN, 5);
+static MESON_GATE(a1_rama, AXI_CLK_EN, 6);
+static MESON_GATE(a1_axi_spifc, AXI_CLK_EN, 7);
+static MESON_GATE(a1_axi_nic, AXI_CLK_EN, 8);
+static MESON_GATE(a1_axi_dma, AXI_CLK_EN, 9);
+static MESON_GATE(a1_cpu_ctrl, AXI_CLK_EN, 10);
+static MESON_GATE(a1_rom, AXI_CLK_EN, 11);
+static MESON_GATE(a1_prod_i2c, AXI_CLK_EN, 12);
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data a1_periphs_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_B_SEL] = &a1_sys_b_sel.hw,
+ [CLKID_SYS_B_DIV] = &a1_sys_b_div.hw,
+ [CLKID_SYS_B] = &a1_sys_b.hw,
+ [CLKID_SYS_A_SEL] = &a1_sys_a_sel.hw,
+ [CLKID_SYS_A_DIV] = &a1_sys_a_div.hw,
+ [CLKID_SYS_A] = &a1_sys_a.hw,
+ [CLKID_SYS_CLK] = &a1_sys_clk.hw,
+ [CLKID_XTAL_CLKTREE] = &a1_xtal_clktree.hw,
+ [CLKID_XTAL_FIXPLL] = &a1_xtal_fixpll.hw,
+ [CLKID_XTAL_USB_PHY] = &a1_xtal_usb_phy.hw,
+ [CLKID_XTAL_USB_CTRL] = &a1_xtal_usb_ctrl.hw,
+ [CLKID_XTAL_HIFIPLL] = &a1_xtal_hifipll.hw,
+ [CLKID_XTAL_SYSPLL] = &a1_xtal_syspll.hw,
+ [CLKID_XTAL_DDS] = &a1_xtal_dds.hw,
+ [CLKID_CLKTREE] = &a1_clk_tree.hw,
+ [CLKID_RESET_CTRL] = &a1_reset_ctrl.hw,
+ [CLKID_ANALOG_CTRL] = &a1_analog_ctrl.hw,
+ [CLKID_PWR_CTRL] = &a1_pwr_ctrl.hw,
+ [CLKID_PAD_CTRL] = &a1_pad_ctrl.hw,
+ [CLKID_SYS_CTRL] = &a1_sys_ctrl.hw,
+ [CLKID_TEMP_SENSOR] = &a1_temp_sensor.hw,
+ [CLKID_AM2AXI_DIV] = &a1_am2axi_dev.hw,
+ [CLKID_SPICC_B] = &a1_spicc_b.hw,
+ [CLKID_SPICC_A] = &a1_spicc_a.hw,
+ [CLKID_CLK_MSR] = &a1_clk_msr.hw,
+ [CLKID_AUDIO] = &a1_audio.hw,
+ [CLKID_JTAG_CTRL] = &a1_jtag_ctrl.hw,
+ [CLKID_SARADC] = &a1_saradc.hw,
+ [CLKID_PWM_EF] = &a1_pwm_ef.hw,
+ [CLKID_PWM_CD] = &a1_pwm_cd.hw,
+ [CLKID_PWM_AB] = &a1_pwm_ab.hw,
+ [CLKID_CEC] = &a1_cec.hw,
+ [CLKID_I2C_S] = &a1_i2c_s.hw,
+ [CLKID_IR_CTRL] = &a1_ir_ctrl.hw,
+ [CLKID_I2C_M_D] = &a1_i2c_m_d.hw,
+ [CLKID_I2C_M_C] = &a1_i2c_m_c.hw,
+ [CLKID_I2C_M_B] = &a1_i2c_m_b.hw,
+ [CLKID_I2C_M_A] = &a1_i2c_m_a.hw,
+ [CLKID_ACODEC] = &a1_acodec.hw,
+ [CLKID_OTP] = &a1_otp.hw,
+ [CLKID_SD_EMMC_A] = &a1_sd_emmc_a.hw,
+ [CLKID_USB_PHY] = &a1_usb_phy.hw,
+ [CLKID_USB_CTRL] = &a1_usb_ctrl.hw,
+ [CLKID_SYS_DSPB] = &a1_sys_dspb.hw,
+ [CLKID_SYS_DSPA] = &a1_sys_dspa.hw,
+ [CLKID_DMA] = &a1_dma.hw,
+ [CLKID_IRQ_CTRL] = &a1_irq_ctrl.hw,
+ [CLKID_NIC] = &a1_nic.hw,
+ [CLKID_GIC] = &a1_gic.hw,
+ [CLKID_UART_C] = &a1_uart_c.hw,
+ [CLKID_UART_B] = &a1_uart_b.hw,
+ [CLKID_UART_A] = &a1_uart_a.hw,
+ [CLKID_SYS_PSRAM] = &a1_sys_psram.hw,
+ [CLKID_RSA] = &a1_rsa.hw,
+ [CLKID_CORESIGHT] = &a1_coresight.hw,
+ [CLKID_AM2AXI_VAD] = &a1_am2axi_vad.hw,
+ [CLKID_AUDIO_VAD] = &a1_audio_vad.hw,
+ [CLKID_AXI_DMC] = &a1_axi_dmc.hw,
+ [CLKID_AXI_PSRAM] = &a1_axi_psram.hw,
+ [CLKID_RAMB] = &a1_ramb.hw,
+ [CLKID_RAMA] = &a1_rama.hw,
+ [CLKID_AXI_SPIFC] = &a1_axi_spifc.hw,
+ [CLKID_AXI_NIC] = &a1_axi_nic.hw,
+ [CLKID_AXI_DMA] = &a1_axi_dma.hw,
+ [CLKID_CPU_CTRL] = &a1_cpu_ctrl.hw,
+ [CLKID_ROM] = &a1_rom.hw,
+ [CLKID_PROC_I2C] = &a1_prod_i2c.hw,
+ [CLKID_DSPA_A_SEL] = &a1_dspa_a_sel.hw,
+ [CLKID_DSPA_A_DIV] = &a1_dspa_a_div.hw,
+ [CLKID_DSPA_A] = &a1_dspa_a.hw,
+ [CLKID_DSPA_B_SEL] = &a1_dspa_b_sel.hw,
+ [CLKID_DSPA_B_DIV] = &a1_dspa_b_div.hw,
+ [CLKID_DSPA_B] = &a1_dspa_b.hw,
+ [CLKID_DSPA_SEL] = &a1_dspa_sel.hw,
+ [CLKID_DSPB_A_SEL] = &a1_dspb_a_sel.hw,
+ [CLKID_DSPB_A_DIV] = &a1_dspb_a_div.hw,
+ [CLKID_DSPB_A] = &a1_dspb_a.hw,
+ [CLKID_DSPB_B_SEL] = &a1_dspb_b_sel.hw,
+ [CLKID_DSPB_B_DIV] = &a1_dspb_b_div.hw,
+ [CLKID_DSPB_B] = &a1_dspb_b.hw,
+ [CLKID_DSPB_SEL] = &a1_dspb_sel.hw,
+ [CLKID_DSPA_EN_DSPA] = &a1_dspa_en_dspa.hw,
+ [CLKID_DSPA_EN_NIC] = &a1_dspa_en_nic.hw,
+ [CLKID_DSPB_EN_DSPB] = &a1_dspb_en_dspb.hw,
+ [CLKID_DSPB_EN_NIC] = &a1_dspb_en_nic.hw,
+ [CLKID_24M] = &a1_24m.hw,
+ [CLKID_24M_DIV2] = &a1_24m_div2.hw,
+ [CLKID_12M] = &a1_12m.hw,
+ [CLKID_DIV2_PRE] = &a1_fclk_div2_divn_pre.hw,
+ [CLKID_FCLK_DIV2_DIVN] = &a1_fclk_div2_divn.hw,
+ [CLKID_GEN_SEL] = &a1_gen_sel.hw,
+ [CLKID_GEN_DIV] = &a1_gen_div.hw,
+ [CLKID_GEN] = &a1_gen.hw,
+ [CLKID_SARADC_SEL] = &a1_saradc_sel.hw,
+ [CLKID_SARADC_DIV] = &a1_saradc_div.hw,
+ [CLKID_SARADC_CLK] = &a1_saradc_clk.hw,
+ [CLKID_PWM_A_SEL] = &a1_pwm_a_sel.hw,
+ [CLKID_PWM_A_DIV] = &a1_pwm_a_div.hw,
+ [CLKID_PWM_A] = &a1_pwm_a.hw,
+ [CLKID_PWM_B_SEL] = &a1_pwm_b_sel.hw,
+ [CLKID_PWM_B_DIV] = &a1_pwm_b_div.hw,
+ [CLKID_PWM_B] = &a1_pwm_b.hw,
+ [CLKID_PWM_C_SEL] = &a1_pwm_c_sel.hw,
+ [CLKID_PWM_C_DIV] = &a1_pwm_c_div.hw,
+ [CLKID_PWM_C] = &a1_pwm_c.hw,
+ [CLKID_PWM_D_SEL] = &a1_pwm_d_sel.hw,
+ [CLKID_PWM_D_DIV] = &a1_pwm_d_div.hw,
+ [CLKID_PWM_D] = &a1_pwm_d.hw,
+ [CLKID_PWM_E_SEL] = &a1_pwm_e_sel.hw,
+ [CLKID_PWM_E_DIV] = &a1_pwm_e_div.hw,
+ [CLKID_PWM_E] = &a1_pwm_e.hw,
+ [CLKID_PWM_F_SEL] = &a1_pwm_f_sel.hw,
+ [CLKID_PWM_F_DIV] = &a1_pwm_f_div.hw,
+ [CLKID_PWM_F] = &a1_pwm_f.hw,
+ [CLKID_SPICC_SEL] = &a1_spicc_sel.hw,
+ [CLKID_SPICC_DIV] = &a1_spicc_div.hw,
+ [CLKID_SPICC_SEL2] = &a1_spicc_sel2.hw,
+ [CLKID_SPICC] = &a1_spicc.hw,
+ [CLKID_TS_DIV] = &a1_ts_div.hw,
+ [CLKID_TS] = &a1_ts.hw,
+ [CLKID_SPIFC_SEL] = &a1_spifc_sel.hw,
+ [CLKID_SPIFC_DIV] = &a1_spifc_div.hw,
+ [CLKID_SPIFC_SEL2] = &a1_spifc_sel2.hw,
+ [CLKID_SPIFC] = &a1_spifc.hw,
+ [CLKID_USB_BUS_SEL] = &a1_usb_bus_sel.hw,
+ [CLKID_USB_BUS_DIV] = &a1_usb_bus_div.hw,
+ [CLKID_USB_BUS] = &a1_usb_bus.hw,
+ [CLKID_SD_EMMC_SEL] = &a1_sd_emmc_sel.hw,
+ [CLKID_SD_EMMC_DIV] = &a1_sd_emmc_div.hw,
+ [CLKID_SD_EMMC_SEL2] = &a1_sd_emmc_sel2.hw,
+ [CLKID_SD_EMMC] = &a1_sd_emmc.hw,
+ [CLKID_PSRAM_SEL] = &a1_psram_sel.hw,
+ [CLKID_PSRAM_DIV] = &a1_psram_div.hw,
+ [CLKID_PSRAM_SEL2] = &a1_psram_sel2.hw,
+ [CLKID_PSRAM] = &a1_psram.hw,
+ [CLKID_DMC_SEL] = &a1_dmc_sel.hw,
+ [CLKID_DMC_DIV] = &a1_dmc_div.hw,
+ [CLKID_DMC_SEL2] = &a1_dmc_sel2.hw,
+ [CLKID_DMC] = &a1_dmc.hw,
+ [CLKID_RTC_32K_CLKIN] = &a1_rtc_32k_clkin.hw,
+ [CLKID_RTC_32K_DIV] = &a1_rtc_32k_div.hw,
+ [CLKID_RTC_32K_XTAL] = &a1_rtc_32k_xtal.hw,
+ [CLKID_RTC_32K_SEL] = &a1_rtc_32k_sel.hw,
+ [CLKID_RTC_CLK] = &a1_rtc_clk.hw,
+ [CLKID_CECA_32K_CLKIN] = &a1_ceca_32k_clkin.hw,
+ [CLKID_CECA_32K_DIV] = &a1_ceca_32k_div.hw,
+ [CLKID_CECA_32K_SEL_PRE] = &a1_ceca_32k_sel_pre.hw,
+ [CLKID_CECA_32K_SEL] = &a1_ceca_32k_sel.hw,
+ [CLKID_CECA_32K] = &a1_ceca_32k_clkout.hw,
+ [CLKID_CECB_32K_CLKIN] = &a1_cecb_32k_clkin.hw,
+ [CLKID_CECB_32K_DIV] = &a1_cecb_32k_div.hw,
+ [CLKID_CECB_32K_SEL_PRE] = &a1_cecb_32k_sel_pre.hw,
+ [CLKID_CECB_32K_SEL] = &a1_cecb_32k_sel.hw,
+ [CLKID_CECB_32K] = &a1_cecb_32k_clkout.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+ &a1_xtal_clktree,
+ &a1_xtal_fixpll,
+ &a1_xtal_usb_phy,
+ &a1_xtal_usb_ctrl,
+ &a1_xtal_hifipll,
+ &a1_xtal_syspll,
+ &a1_xtal_dds,
+ &a1_clk_tree,
+ &a1_reset_ctrl,
+ &a1_analog_ctrl,
+ &a1_pwr_ctrl,
+ &a1_sys_ctrl,
+ &a1_temp_sensor,
+ &a1_am2axi_dev,
+ &a1_spicc_b,
+ &a1_spicc_a,
+ &a1_clk_msr,
+ &a1_audio,
+ &a1_jtag_ctrl,
+ &a1_saradc,
+ &a1_pwm_ef,
+ &a1_pwm_cd,
+ &a1_pwm_ab,
+ &a1_cec,
+ &a1_i2c_s,
+ &a1_ir_ctrl,
+ &a1_i2c_m_d,
+ &a1_i2c_m_c,
+ &a1_i2c_m_b,
+ &a1_i2c_m_a,
+ &a1_acodec,
+ &a1_otp,
+ &a1_sd_emmc_a,
+ &a1_usb_phy,
+ &a1_usb_ctrl,
+ &a1_sys_dspb,
+ &a1_sys_dspa,
+ &a1_dma,
+ &a1_irq_ctrl,
+ &a1_nic,
+ &a1_gic,
+ &a1_uart_c,
+ &a1_uart_b,
+ &a1_uart_a,
+ &a1_sys_psram,
+ &a1_rsa,
+ &a1_coresight,
+ &a1_am2axi_vad,
+ &a1_audio_vad,
+ &a1_axi_dmc,
+ &a1_axi_psram,
+ &a1_ramb,
+ &a1_rama,
+ &a1_axi_spifc,
+ &a1_axi_nic,
+ &a1_axi_dma,
+ &a1_cpu_ctrl,
+ &a1_rom,
+ &a1_prod_i2c,
+ &a1_dspa_a_sel,
+ &a1_dspa_a_div,
+ &a1_dspa_a,
+ &a1_dspa_b_sel,
+ &a1_dspa_b_div,
+ &a1_dspa_b,
+ &a1_dspa_sel,
+ &a1_dspb_a_sel,
+ &a1_dspb_a_div,
+ &a1_dspb_a,
+ &a1_dspb_b_sel,
+ &a1_dspb_b_div,
+ &a1_dspb_b,
+ &a1_dspb_sel,
+ &a1_dspa_en_dspa,
+ &a1_dspa_en_nic,
+ &a1_dspb_en_dspb,
+ &a1_dspb_en_nic,
+ &a1_24m,
+ &a1_12m,
+ &a1_fclk_div2_divn_pre,
+ &a1_fclk_div2_divn,
+ &a1_gen_sel,
+ &a1_gen_div,
+ &a1_gen,
+ &a1_saradc_sel,
+ &a1_saradc_div,
+ &a1_saradc_clk,
+ &a1_pwm_a_sel,
+ &a1_pwm_a_div,
+ &a1_pwm_a,
+ &a1_pwm_b_sel,
+ &a1_pwm_b_div,
+ &a1_pwm_b,
+ &a1_pwm_c_sel,
+ &a1_pwm_c_div,
+ &a1_pwm_c,
+ &a1_pwm_d_sel,
+ &a1_pwm_d_div,
+ &a1_pwm_d,
+ &a1_pwm_e_sel,
+ &a1_pwm_e_div,
+ &a1_pwm_e,
+ &a1_pwm_f_sel,
+ &a1_pwm_f_div,
+ &a1_pwm_f,
+ &a1_spicc_sel,
+ &a1_spicc_div,
+ &a1_spicc_sel2,
+ &a1_spicc,
+ &a1_ts_div,
+ &a1_ts,
+ &a1_spifc_sel,
+ &a1_spifc_div,
+ &a1_spifc_sel2,
+ &a1_spifc,
+ &a1_usb_bus_sel,
+ &a1_usb_bus_div,
+ &a1_usb_bus,
+ &a1_sd_emmc_sel,
+ &a1_sd_emmc_div,
+ &a1_sd_emmc_sel2,
+ &a1_sd_emmc,
+ &a1_psram_sel,
+ &a1_psram_div,
+ &a1_psram_sel2,
+ &a1_psram,
+ &a1_dmc_sel,
+ &a1_dmc_div,
+ &a1_dmc_sel2,
+ &a1_dmc,
+ &a1_sys_b_sel,
+ &a1_sys_b_div,
+ &a1_sys_b,
+ &a1_sys_a_sel,
+ &a1_sys_a_div,
+ &a1_sys_a,
+ &a1_sys_clk,
+ &a1_rtc_32k_clkin,
+ &a1_rtc_32k_div,
+ &a1_rtc_32k_xtal,
+ &a1_rtc_32k_sel,
+ &a1_rtc_clk,
+ &a1_ceca_32k_clkin,
+ &a1_ceca_32k_div,
+ &a1_ceca_32k_sel_pre,
+ &a1_ceca_32k_sel,
+ &a1_ceca_32k_clkout,
+ &a1_cecb_32k_clkin,
+ &a1_cecb_32k_div,
+ &a1_cecb_32k_sel_pre,
+ &a1_cecb_32k_sel,
+ &a1_cecb_32k_clkout,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = meson_eeclkc_probe(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct meson_eeclkc_data a1_periphs_data = {
+ .regmap_clks = a1_periphs_regmaps,
+ .regmap_clk_num = ARRAY_SIZE(a1_periphs_regmaps),
+ .hw_onecell_data = &a1_periphs_hw_onecell_data,
+};
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a1-periphs-clkc",
+ .data = &a1_periphs_data
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver a1_driver = {
+ .probe = meson_a1_periphs_probe,
+ .driver = {
+ .name = "a1-periphs-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(a1_driver);
diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h
new file mode 100644
index 0000000..1ae5e04
--- /dev/null
+++ b/drivers/clk/meson/a1.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __A1_H
+#define __A1_H
+
+/* peripheral clock controller register offset */
+#define SYS_OSCIN_CTRL 0x0
+#define RTC_BY_OSCIN_CTRL0 0x4
+#define RTC_BY_OSCIN_CTRL1 0x8
+#define RTC_CTRL 0xc
+#define SYS_CLK_CTRL0 0x10
+#define AXI_CLK_CTRL0 0x14
+#define SYS_CLK_EN0 0x1c
+#define SYS_CLK_EN1 0x20
+#define AXI_CLK_EN 0x24
+#define DSPA_CLK_EN 0x28
+#define DSPB_CLK_EN 0x2c
+#define DSPA_CLK_CTRL0 0x30
+#define DSPB_CLK_CTRL0 0x34
+#define CLK12_24_CTRL 0x38
+#define GEN_CLK_CTRL 0x3c
+#define TIMESTAMP_CTRL0 0x40
+#define TIMESTAMP_CTRL1 0x44
+#define TIMESTAMP_CTRL2 0x48
+#define TIMESTAMP_VAL0 0x4c
+#define TIMESTAMP_VAL1 0x50
+#define TIMEBASE_CTRL0 0x54
+#define TIMEBASE_CTRL1 0x58
+#define SAR_ADC_CLK_CTRL 0xc0
+#define PWM_CLK_AB_CTRL 0xc4
+#define PWM_CLK_CD_CTRL 0xc8
+#define PWM_CLK_EF_CTRL 0xcc
+#define SPICC_CLK_CTRL 0xd0
+#define TS_CLK_CTRL 0xd4
+#define SPIFC_CLK_CTRL 0xd8
+#define USB_BUSCLK_CTRL 0xdc
+#define SD_EMMC_CLK_CTRL 0xe0
+#define CECA_CLK_CTRL0 0xe4
+#define CECA_CLK_CTRL1 0xe8
+#define CECB_CLK_CTRL0 0xec
+#define CECB_CLK_CTRL1 0xf0
+#define PSRAM_CLK_CTRL 0xf4
+#define DMC_CLK_CTRL 0xf8
+#define FCLK_DIV1_SEL 0xfc
+#define TST_CTRL 0x100
+
+#define CLKID_XTAL_CLKTREE 0
+#define CLKID_SYS_A_SEL 89
+#define CLKID_SYS_A_DIV 90
+#define CLKID_SYS_A 91
+#define CLKID_SYS_B_SEL 92
+#define CLKID_SYS_B_DIV 93
+#define CLKID_SYS_B 94
+#define CLKID_DSPA_A_SEL 95
+#define CLKID_DSPA_A_DIV 96
+#define CLKID_DSPA_A 97
+#define CLKID_DSPA_B_SEL 98
+#define CLKID_DSPA_B_DIV 99
+#define CLKID_DSPA_B 100
+#define CLKID_DSPB_A_SEL 101
+#define CLKID_DSPB_A_DIV 102
+#define CLKID_DSPB_A 103
+#define CLKID_DSPB_B_SEL 104
+#define CLKID_DSPB_B_DIV 105
+#define CLKID_DSPB_B 106
+#define CLKID_RTC_32K_CLKIN 107
+#define CLKID_RTC_32K_DIV 108
+#define CLKID_RTC_32K_XTAL 109
+#define CLKID_RTC_32K_SEL 110
+#define CLKID_CECB_32K_CLKIN 111
+#define CLKID_CECB_32K_DIV 112
+#define CLKID_CECB_32K_SEL_PRE 113
+#define CLKID_CECB_32K_SEL 114
+#define CLKID_CECA_32K_CLKIN 115
+#define CLKID_CECA_32K_DIV 116
+#define CLKID_CECA_32K_SEL_PRE 117
+#define CLKID_CECA_32K_SEL 118
+#define CLKID_DIV2_PRE 119
+#define CLKID_24M_DIV2 120
+#define CLKID_GEN_SEL 121
+#define CLKID_GEN_DIV 122
+#define CLKID_SARADC_DIV 123
+#define CLKID_PWM_A_SEL 124
+#define CLKID_PWM_A_DIV 125
+#define CLKID_PWM_B_SEL 126
+#define CLKID_PWM_B_DIV 127
+#define CLKID_PWM_C_SEL 128
+#define CLKID_PWM_C_DIV 129
+#define CLKID_PWM_D_SEL 130
+#define CLKID_PWM_D_DIV 131
+#define CLKID_PWM_E_SEL 132
+#define CLKID_PWM_E_DIV 133
+#define CLKID_PWM_F_SEL 134
+#define CLKID_PWM_F_DIV 135
+#define CLKID_SPICC_SEL 136
+#define CLKID_SPICC_DIV 137
+#define CLKID_SPICC_SEL2 138
+#define CLKID_TS_DIV 139
+#define CLKID_SPIFC_SEL 140
+#define CLKID_SPIFC_DIV 141
+#define CLKID_SPIFC_SEL2 142
+#define CLKID_USB_BUS_SEL 143
+#define CLKID_USB_BUS_DIV 144
+#define CLKID_SD_EMMC_SEL 145
+#define CLKID_SD_EMMC_DIV 146
+#define CLKID_SD_EMMC_SEL2 147
+#define CLKID_PSRAM_SEL 148
+#define CLKID_PSRAM_DIV 149
+#define CLKID_PSRAM_SEL2 150
+#define CLKID_DMC_SEL 151
+#define CLKID_DMC_DIV 152
+#define CLKID_DMC_SEL2 153
+#define NR_CLKS 154
+
+#include <dt-bindings/clock/a1-clkc.h>
+
+#endif /* __A1_H */
--
1.9.1
\
 
 \ /
  Last update: 2019-10-18 09:16    [W:1.561 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site