lkml.org 
[lkml]   [2019]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 089/100] iio: adc: hx711: fix bug in sampling of data
Date
From: Andreas Klinger <ak@it-klinger.de>

[ Upstream commit 4043ecfb5fc4355a090111e14faf7945ff0fdbd5 ]

Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.

Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.

This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.

Fixes: c3b2fdd0ea7e ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/hx711.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 36b59d8957fb8..6c5d81a89aec9 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -109,14 +109,14 @@ struct hx711_data {

static int hx711_cycle(struct hx711_data *hx711_data)
{
- int val;
+ unsigned long flags;

/*
* if preempted for more then 60us while PD_SCK is high:
* hx711 is going in reset
* ==> measuring is false
*/
- preempt_disable();
+ local_irq_save(flags);
gpiod_set_value(hx711_data->gpiod_pd_sck, 1);

/*
@@ -126,7 +126,6 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);

- val = gpiod_get_value(hx711_data->gpiod_dout);
/*
* here we are not waiting for 0.2 us as suggested by the datasheet,
* because the oscilloscope showed in a test scenario
@@ -134,7 +133,7 @@ static int hx711_cycle(struct hx711_data *hx711_data)
* and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
*/
gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
- preempt_enable();
+ local_irq_restore(flags);

/*
* make it a square wave for addressing cases with capacitance on
@@ -142,7 +141,8 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);

- return val;
+ /* sample as late as possible */
+ return gpiod_get_value(hx711_data->gpiod_dout);
}

static int hx711_read(struct hx711_data *hx711_data)
--
2.20.1
\
 
 \ /
  Last update: 2019-10-19 00:08    [W:0.227 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site