lkml.org 
[lkml]   [2019]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 5/5] cpufreq: vexpress-spc: fix some coding style issues
On 17-10-19, 13:35, Sudeep Holla wrote:
> Fix the following checkpatch checks/warnings:
>
> CHECK: Unnecessary parentheses around the code
> CHECK: Alignment should match open parenthesis
> CHECK: Prefer kernel type 'u32' over 'uint32_t'
> WARNING: Missing a blank line after declarations
>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/vexpress-spc-cpufreq.c | 43 ++++++++++++--------------
> 1 file changed, 20 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
> index 81064430317f..8ecb2961be86 100644
> --- a/drivers/cpufreq/vexpress-spc-cpufreq.c
> +++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
> @@ -79,8 +79,8 @@ static unsigned int find_cluster_maxfreq(int cluster)
> for_each_online_cpu(j) {
> cpu_freq = per_cpu(cpu_last_req_freq, j);
>
> - if ((cluster == per_cpu(physical_cluster, j)) &&
> - (max_freq < cpu_freq))
> + if (cluster == per_cpu(physical_cluster, j) &&
> + max_freq < cpu_freq)
> max_freq = cpu_freq;
> }
>
> @@ -188,22 +188,19 @@ static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy,
> freqs_new = freq_table[cur_cluster][index].frequency;
>
> if (is_bL_switching_enabled()) {
> - if ((actual_cluster == A15_CLUSTER) &&
> - (freqs_new < clk_big_min)) {
> + if (actual_cluster == A15_CLUSTER && freqs_new < clk_big_min)
> new_cluster = A7_CLUSTER;
> - } else if ((actual_cluster == A7_CLUSTER) &&
> - (freqs_new > clk_little_max)) {
> + else if (actual_cluster == A7_CLUSTER &&
> + freqs_new > clk_little_max)
> new_cluster = A15_CLUSTER;
> - }
> }
>
> ret = ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster,
> freqs_new);
>
> - if (!ret) {
> + if (!ret)

That's not the standard way in Linux I believe. We do use {} even when
the body is single line but broken into two, like below.

> arch_set_freq_scale(policy->related_cpus, freqs_new,
> policy->cpuinfo.max_freq);
> - }
>
> return ret;
> }
> @@ -222,7 +219,8 @@ static inline u32 get_table_count(struct cpufreq_frequency_table *table)
> static inline u32 get_table_min(struct cpufreq_frequency_table *table)
> {
> struct cpufreq_frequency_table *pos;
> - uint32_t min_freq = ~0;
> + u32 min_freq = ~0;
> +
> cpufreq_for_each_entry(pos, table)
> if (pos->frequency < min_freq)
> min_freq = pos->frequency;
> @@ -233,7 +231,8 @@ static inline u32 get_table_min(struct cpufreq_frequency_table *table)
> static inline u32 get_table_max(struct cpufreq_frequency_table *table)
> {
> struct cpufreq_frequency_table *pos;
> - uint32_t max_freq = 0;
> + u32 max_freq = 0;
> +
> cpufreq_for_each_entry(pos, table)
> if (pos->frequency > max_freq)
> max_freq = pos->frequency;
> @@ -255,14 +254,11 @@ static int merge_cluster_tables(void)
> freq_table[MAX_CLUSTERS] = table;
>
> /* Add in reverse order to get freqs in increasing order */
> - for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
> + for (i = MAX_CLUSTERS - 1; i >= 0; i--)
> for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
> - j++) {
> - table[k].frequency = VIRT_FREQ(i,
> - freq_table[i][j].frequency);
> - k++;
> - }
> - }
> + j++, k++)

same here, please keep {}.

> + table[k].frequency =
> + VIRT_FREQ(i, freq_table[i][j].frequency);
>
> table[k].driver_data = k;
> table[k].frequency = CPUFREQ_TABLE_END;
> @@ -332,13 +328,13 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
> return 0;
>
> dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n",
> - __func__, cpu_dev->id, cluster);
> + __func__, cpu_dev->id, cluster);
> ret = PTR_ERR(clk[cluster]);
> dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
>
> out:
> dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
> - cluster);
> + cluster);
> return ret;
> }
>
> @@ -406,7 +402,7 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
> cpu_dev = get_cpu_device(policy->cpu);
> if (!cpu_dev) {
> pr_err("%s: failed to get cpu%d device\n", __func__,
> - policy->cpu);
> + policy->cpu);
> return -ENODEV;
> }
>
> @@ -432,7 +428,8 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
> dev_pm_opp_of_register_em(policy->cpus);
>
> if (is_bL_switching_enabled())
> - per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
> + per_cpu(cpu_last_req_freq, policy->cpu) =
> + clk_get_cpu_rate(policy->cpu);
>
> dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
> return 0;
> @@ -451,7 +448,7 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
> cpu_dev = get_cpu_device(policy->cpu);
> if (!cpu_dev) {
> pr_err("%s: failed to get cpu%d device\n", __func__,
> - policy->cpu);
> + policy->cpu);
> return -ENODEV;
> }
>
> --
> 2.17.1

--
viresh

\
 
 \ /
  Last update: 2019-10-18 07:56    [W:2.030 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site