lkml.org 
[lkml]   [2019]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT][PATCH 2/3] cpufreq: Use per-policy frequency QoS
From
Date
16.10.2019 21:01, Dmitry Osipenko пишет:
> 16.10.2019 13:47, Rafael J. Wysocki пишет:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> Replace the CPU device PM QoS used for the management of min and max
>> frequency constraints in cpufreq (and its users) with per-policy
>> frequency QoS to avoid problems with cpufreq policies covering
>> more then one CPU.
>>
>> Namely, a cpufreq driver is registered with the subsys interface
>> which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
>> currently the PM QoS notifiers are added to the first CPU in the
>> policy (i.e. CPU0 in the majority of cases).
>>
>> In turn, when the cpufreq driver is unregistered, the subsys interface
>> doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
>> and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
>> called for the last CPU in the policy, say CPUx, which as a rule is
>> not CPU0 if the policy covers more than one CPU. Then, the PM QoS
>> notifiers cannot be removed, because CPUx does not have them, and
>> they are still there in the device PM QoS notifiers list of CPU0,
>> which prevents new PM QoS notifiers from being registered for CPU0
>> on the next attempt to register the cpufreq driver.
>>
>> The same issue occurs when the first CPU in the policy goes offline
>> before unregistering the driver.
>>
>> After this change it does not matter which CPU is the policy CPU at
>> the driver registration time and whether or not it is online all the
>> time, because the frequency QoS is per policy and not per CPU.
>>
>> Fixes: 18c49926c4bf ("cpufreq: Add QoS requests for userspace constraints")
>> Reported-by: Dmitry Osipenko <digetx@gmail.com>
>> Reported-by: Sudeep Holla <sudeep.holla@arm.com>
>> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
>> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>> ---
>>
>> Applies on top of https://patchwork.kernel.org/patch/11191343/
>>
>> ---
>> drivers/acpi/processor_driver.c | 9 +---
>> drivers/acpi/processor_perflib.c | 18 ++++----
>> drivers/acpi/processor_thermal.c | 18 ++++----
>> drivers/cpufreq/cpufreq.c | 59 ++++++++++++-----------------
>> drivers/cpufreq/intel_pstate.c | 30 +++++++-------
>> drivers/cpufreq/ppc_cbe_cpufreq_pmi.c | 15 +++----
>> drivers/macintosh/windfarm_cpufreq_clamp.c | 38 ++++++++++--------
>> drivers/thermal/cpu_cooling.c | 14 +++---
>> include/acpi/processor.h | 20 ++++-----
>> include/linux/cpufreq.h | 7 ++-
>> 10 files changed, 114 insertions(+), 114 deletions(-)
>
> Thanks, Rafael! The use-after-free bug is fixed for me.
>
> Tested-by: Dmitry Osipenko <digetx@gmail.com>
>
> Viresh, I'm still seeing the warning splat after cpufreq-dt reloading. It looks like there is a
> problem with dev_pm_opp_set_supported_hw() which should be re-applied after
> dev_pm_opp_of_cpumask_remove_table() in order to avoid that warning, but setting supported hardware
> is not a part of the cpufreq-dt driver and thus I think there is a problem here.
>
> [ 43.362906] ------------[ cut here ]------------
> [ 43.363403] WARNING: CPU: 2 PID: 224 at lib/refcount.c:156 dev_pm_opp_of_add_table+0x59/0x128
> [ 43.364119] refcount_t: increment on 0; use-after-free.
> [ 43.364562] Modules linked in: cpufreq_dt(+) tegra30_devfreq [last unloaded: cpufreq_dt]
> [ 43.365268] CPU: 2 PID: 224 Comm: modprobe Tainted: G W
> 5.4.0-rc3-next-20191016-00202-gdc740c468ab7 #2651
> [ 43.366167] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> [ 43.366747] [<c011116d>] (unwind_backtrace) from [<c010bb05>] (show_stack+0x11/0x14)
> [ 43.367417] [<c010bb05>] (show_stack) from [<c0d75aad>] (dump_stack+0x89/0x98)
> [ 43.368046] [<c0d75aad>] (dump_stack) from [<c0127813>] (__warn+0x10f/0x110)
> [ 43.368650] [<c0127813>] (__warn) from [<c0127b09>] (warn_slowpath_fmt+0x61/0x78)
> [ 43.369292] [<c0127b09>] (warn_slowpath_fmt) from [<c095b161>] (dev_pm_opp_of_add_table+0x59/0x128)
> [ 43.370057] [<c095b161>] (dev_pm_opp_of_add_table) from [<c095b261>]
> (dev_pm_opp_of_cpumask_add_table+0x31/0x88)
> [ 43.370946] [<c095b261>] (dev_pm_opp_of_cpumask_add_table) from [<bf80024d>]
> (cpufreq_init+0xd9/0x280 [cpufreq_dt])
> [ 43.371853] [<bf80024d>] (cpufreq_init [cpufreq_dt]) from [<c095ec63>] (cpufreq_online+0x3eb/0x890)
> [ 43.372638] [<c095ec63>] (cpufreq_online) from [<c095f191>] (cpufreq_add_dev+0x79/0x80)
> [ 43.373340] [<c095f191>] (cpufreq_add_dev) from [<c07201db>] (subsys_interface_register+0xc3/0x100)
> [ 43.374113] [<c07201db>] (subsys_interface_register) from [<c095d91b>]
> (cpufreq_register_driver+0x13b/0x1f0)
> [ 43.374960] [<c095d91b>] (cpufreq_register_driver) from [<bf80047d>] (dt_cpufreq_probe+0x89/0xe0
> [cpufreq_dt])
> [ 43.375818] [<bf80047d>] (dt_cpufreq_probe [cpufreq_dt]) from [<c0723df9>]
> (platform_drv_probe+0x49/0x88)
> [ 43.376630] [<c0723df9>] (platform_drv_probe) from [<c0721aa1>] (really_probe+0x109/0x378)
> [ 43.377330] [<c0721aa1>] (really_probe) from [<c0721e5b>] (driver_probe_device+0x57/0x15c)
> [ 43.378030] [<c0721e5b>] (driver_probe_device) from [<c072210d>] (device_driver_attach+0x61/0x64)
> [ 43.378776] [<c072210d>] (device_driver_attach) from [<c0722159>] (__driver_attach+0x49/0xa0)
> [ 43.379493] [<c0722159>] (__driver_attach) from [<c071fe35>] (bus_for_each_dev+0x69/0x94)
> [ 43.380185] [<c071fe35>] (bus_for_each_dev) from [<c0720f39>] (bus_add_driver+0x179/0x1e8)
> [ 43.380883] [<c0720f39>] (bus_add_driver) from [<c0722cbf>] (driver_register+0x8f/0x130)
> [ 43.381584] [<c0722cbf>] (driver_register) from [<bf80d017>] (dt_cpufreq_platdrv_init+0x17/0x1000
> [cpufreq_dt])
> [ 43.382447] [<bf80d017>] (dt_cpufreq_platdrv_init [cpufreq_dt]) from [<d7fca400>] (0xd7fca400)
> [ 43.383252] ---[ end trace f68728a0d3053b55 ]---
>

Viresh, the warning is actually triggered by this line:

https://elixir.bootlin.com/linux/v5.4-rc2/source/drivers/opp/of.c#L664

So it looks like the cpufreq-dt driver removal drops
opp_table->list_kref more times than it should be. I may try to take a
closer look at it later on, please let me know if you have any suggestions.

\
 
 \ /
  Last update: 2019-10-17 23:30    [W:0.118 / U:3.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site