lkml.org 
[lkml]   [2019]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
czw., 17 paź 2019 o 05:11 Chris Packham
<chris.packham@alliedtelesis.co.nz> napisał(a):
>
> This GPIO controller is present on a number of Broadcom switch ASICs
> with integrated SoCs. It is similar to the nsp-gpio and iproc-gpio
> blocks but different enough to require a separate driver.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>
> Notes:
> Changes in v2:
> - Document as DT schema
> - Include ngpios, #gpio-cells and gpio-controller properties
>
> .../bindings/gpio/brcm,xgs-iproc.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml
> new file mode 100644
> index 000000000000..71998551209e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/brcm,xgs-iproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom XGS iProc GPIO controller
> +
> +maintainers:
> + - Chris Packham <chris.packham@alliedtelesis.co.nz>
> +
> +description: |
> + This controller is the Chip Common A GPIO present on a number of Broadcom
> + switch ASICs with integrated SoCs.
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,iproc-gpio-cca

I believe this should be:

const: brcm,iproc-gpio-cca

Bart

> +
> + reg:
> + minItems: 2
> + maxItems: 2
> + description:
> + The first region defines the base I/O address containing
> + the GPIO controller registers. The second region defines
> + the I/O address containing the Chip Common A interrupt
> + registers.
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + ngpios:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 32
> +
> + interrupt-controller:
> + type: boolean
> +
> + '#interrupt-cells':
> + const: 2
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - "#gpio-cells"
> + - gpio-controller
> +
> +allOf:
> + - if:
> + properties:
> + interrupt-controller:
> + contains:
> + const: true
> + then:
> + required:
> + - interrupts
> + - '#interrupt-cells'
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + gpio@18000060 {
> + compatible = "brcm,iproc-gpio-cca";
> + #gpio-cells = <2>;
> + reg = <0x18000060 0x50>,
> + <0x18000000 0x50>;
> + ngpios = <12>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> +
> +...
> --
> 2.23.0
>

\
 
 \ /
  Last update: 2019-10-17 17:18    [W:0.075 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site