lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] drm/virtio: Export resource handles via DMA-buf API
On Wed, Oct 16, 2019 at 12:19:02PM +0900, Tomasz Figa wrote:
> On Wed, Oct 9, 2019 at 12:04 AM Daniel Vetter <daniel@ffwll.ch> wrote:
> >
> > On Tue, Oct 08, 2019 at 07:49:39PM +0900, Tomasz Figa wrote:
> > > On Tue, Oct 8, 2019 at 7:03 PM Daniel Vetter <daniel@ffwll.ch> wrote:
> > > >
> > > > On Sat, Oct 05, 2019 at 02:41:54PM +0900, Tomasz Figa wrote:
> > > > > Hi Daniel, Gerd,
> > > > >
> > > > > On Tue, Sep 17, 2019 at 10:23 PM Daniel Vetter <daniel@ffwll.ch> wrote:
> > > > > >
> > > > > > On Thu, Sep 12, 2019 at 06:41:21PM +0900, Tomasz Figa wrote:
> > > > > > > This patch is an early RFC to judge the direction we are following in
> > > > > > > our virtualization efforts in Chrome OS. The purpose is to start a
> > > > > > > discussion on how to handle buffer sharing between multiple virtio
> > > > > > > devices.
> > > > > > >
> > > > > > > On a side note, we are also working on a virtio video decoder interface
> > > > > > > and implementation, with a V4L2 driver for Linux. Those will be posted
> > > > > > > for review in the near future as well.
> > > > > > >
> > > > > > > Any feedback will be appreciated! Thanks in advance.
> > > > > > >
> > > > > > > ===
> > > > > > >
> > > > > > > With the range of use cases for virtualization expanding, there is going
> > > > > > > to be more virtio devices added to the ecosystem. Devices such as video
> > > > > > > decoders, encoders, cameras, etc. typically work together with the
> > > > > > > display and GPU in a pipeline manner, which can only be implemented
> > > > > > > efficiently by sharing the buffers between producers and consumers.
> > > > > > >
> > > > > > > Existing buffer management framework in Linux, such as the videobuf2
> > > > > > > framework in V4L2, implements all the DMA-buf handling inside generic
> > > > > > > code and do not expose any low level information about the buffers to
> > > > > > > the drivers.
> > > > > > >
> > > > > > > To seamlessly enable buffer sharing with drivers using such frameworks,
> > > > > > > make the virtio-gpu driver expose the resource handle as the DMA address
> > > > > > > of the buffer returned from the DMA-buf mapping operation. Arguably, the
> > > > > > > resource handle is a kind of DMA address already, as it is the buffer
> > > > > > > identifier that the device needs to access the backing memory, which is
> > > > > > > exactly the same role a DMA address provides for native devices.
> > > > > > >
> > > > > > > A virtio driver that does memory management fully on its own would have
> > > > > > > code similar to following. The code is identical to what a regular
> > > > > > > driver for real hardware would do to import a DMA-buf.
> > > > > > >
> > > > > > > static int virtio_foo_get_resource_handle(struct virtio_foo *foo,
> > > > > > > struct dma_buf *dma_buf, u32 *id)
> > > > > > > {
> > > > > > > struct dma_buf_attachment *attach;
> > > > > > > struct sg_table *sgt;
> > > > > > > int ret = 0;
> > > > > > >
> > > > > > > attach = dma_buf_attach(dma_buf, foo->dev);
> > > > > > > if (IS_ERR(attach))
> > > > > > > return PTR_ERR(attach);
> > > > > > >
> > > > > > > sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL);
> > > > > > > if (IS_ERR(sgt)) {
> > > > > > > ret = PTR_ERR(sgt);
> > > > > > > goto err_detach;
> > > > > > > }
> > > > > > >
> > > > > > > if (sgt->nents != 1) {
> > > > > > > ret = -EINVAL;
> > > > > > > goto err_unmap;
> > > > > > > }
> > > > > > >
> > > > > > > *id = sg_dma_address(sgt->sgl);
> > > > > >
> > > > > > I agree with Gerd, this looks pretty horrible to me.
> > > > > >
> > > > > > The usual way we've done these kind of special dma-bufs is:
> > > > > >
> > > > > > - They all get allocated at the same place, through some library or
> > > > > > whatever.
> > > > > >
> > > > > > - You add a dma_buf_is_virtio(dma_buf) function, or maybe something that
> > > > > > also upcasts or returns NULL, which checks for dma_buf->ops.
> > > > > >
> > > > >
> > > > > Thanks for a lot of valuable feedback and sorry for the late reply.
> > > > >
> > > > > While I agree that stuffing the resource ID in sg_dma_address() is
> > > > > quite ugly (for example, the regular address arithmetic doesn't work),
> > > > > I still believe we need to convey information about these buffers
> > > > > using regular kernel interfaces.
> > > > >
> > > > > Drivers in some subsystems like DRM tend to open code any buffer
> > > > > management and then it wouldn't be any problem to do what you
> > > > > suggested. However, other subsystems have generic frameworks for
> > > > > buffer management, like videobuf2 for V4L2. Those assume regular
> > > > > DMA-bufs that can be handled with regular dma_buf_() API and described
> > > > > using sgtables and/or pfn vectors and/or DMA addresses.
> > > >
> > > > "other subsystem sucks" doesn't sound like a good design paradigm to me.
> > > > Forced midlayers are a bad design decision isn't really new at all ...
> > > >
> > >
> > > Sorry, I don't think that's an argument. There are various design
> > > aspects and for the scenarios for which V4L2 was designed, the other
> > > subsystems may actually "suck". Let's not derail the discussion into
> > > judging which subsystems are better or worse.
> > >
> > > Those mid layers are not forced, you don't have to use videobuf2, but
> > > it saves you a lot of open coding, potential security issues and so
> > > on.
> >
> > Oh, it sounded like they're forced. If they're not then we should still be
> > able to do whatever special handling we want/need to do.
>
> They aren't forced, but if one doesn't use them, they need to
> reimplement the buffer queues in the driver. That's quite a big
> effort, especially given the subtleties of stateful (i.e. fully
> hardware-based) video decoding, such as frame buffer reordering,
> dynamic resolution changes and so on.
>
> That said, we could still grab the DMA-buf FD directly in the V4L2
> QBUF callback of the driver and save it in some map, so we can look it
> up later when given a buffer index. But we would still need to make
> the DMA-buf itself importable. For virtio-gpu I guess that would mean
> returning an sg_table backed by the shadow buffer pages.
>
> By the way, have you received the emails from the other thread?
> ([PATCH] [RFC] vdec: Add virtio video decode device specification)

Yeah I've seen something fly by. Didn't look like I could contribute
anything useful there.
-Daniel

>
> Best regards,
> Tomasz
>
>
> > -Daniel
> >
> > >
> > > > > > - Once you've upcasted at runtime by checking for ->ops, you can add
> > > > > > whatever fancy interfaces you want. Including a real&proper interface to
> > > > > > get at whatever underlying id you need to for real buffer sharing
> > > > > > between virtio devices.
> > > > > >
> > > > > > In a way virtio buffer/memory ids are a kind of private bus, entirely
> > > > > > distinct from the dma_addr_t bus. So can't really stuff them under this
> > > > > > same thing like we e.g. do with pci peer2peer.
> > > > >
> > > > > As I mentioned earlier, there is no single "dma_addr_t bus". Each
> > > > > device (as in struct device) can be on its own different DMA bus, with
> > > > > a different DMA address space. There is not even a guarantee that a
> > > > > DMA address obtained for one PCI device will be valid for another if
> > > > > they are on different buses, which could have different address
> > > > > mappings.
> > > > >
> > > > > Putting that aside, we're thinking about a different approach, as Gerd
> > > > > suggested in another thread, the one about the Virtio Video Decoder
> > > > > protocol. I'm going to reply there, making sure to CC everyone
> > > > > involved here.
> > > >
> > > > ok.
> > > > -Daniel
> > > >
> > > > >
> > > > > Best regards,
> > > > > Tomasz
> > > > >
> > > > > > -Daniel
> > > > > >
> > > > > > >
> > > > > > > err_unmap:
> > > > > > > dma_buf_unmap_attachment(attach, sgt, DMA_BIDIRECTIONAL);
> > > > > > > err_detach:
> > > > > > > dma_buf_detach(dma_buf, attach);
> > > > > > >
> > > > > > > return ret;
> > > > > > > }
> > > > > > >
> > > > > > > On the other hand, a virtio driver that uses an existing kernel
> > > > > > > framework to manage buffers would not need to explicitly handle anything
> > > > > > > at all, as the framework part responsible for importing DMA-bufs would
> > > > > > > already do the work. For example, a V4L2 driver using the videobuf2
> > > > > > > framework would just call thee vb2_dma_contig_plane_dma_addr() function
> > > > > > > to get what the above open-coded function would return.
> > > > > > >
> > > > > > > Signed-off-by: Tomasz Figa <tfiga@chromium.org>
> > > > > > > ---
> > > > > > > drivers/gpu/drm/virtio/virtgpu_drv.c | 2 +
> > > > > > > drivers/gpu/drm/virtio/virtgpu_drv.h | 4 ++
> > > > > > > drivers/gpu/drm/virtio/virtgpu_prime.c | 81 ++++++++++++++++++++++++++
> > > > > > > 3 files changed, 87 insertions(+)
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.c b/drivers/gpu/drm/virtio/virtgpu_drv.c
> > > > > > > index 0fc32fa0b3c0..ac095f813134 100644
> > > > > > > --- a/drivers/gpu/drm/virtio/virtgpu_drv.c
> > > > > > > +++ b/drivers/gpu/drm/virtio/virtgpu_drv.c
> > > > > > > @@ -210,6 +210,8 @@ static struct drm_driver driver = {
> > > > > > > #endif
> > > > > > > .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > > > > > > .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > > > > > > + .gem_prime_export = virtgpu_gem_prime_export,
> > > > > > > + .gem_prime_import = virtgpu_gem_prime_import,
> > > > > > > .gem_prime_get_sg_table = virtgpu_gem_prime_get_sg_table,
> > > > > > > .gem_prime_import_sg_table = virtgpu_gem_prime_import_sg_table,
> > > > > > > .gem_prime_vmap = virtgpu_gem_prime_vmap,
> > > > > > > diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.h b/drivers/gpu/drm/virtio/virtgpu_drv.h
> > > > > > > index e28829661724..687cfce91885 100644
> > > > > > > --- a/drivers/gpu/drm/virtio/virtgpu_drv.h
> > > > > > > +++ b/drivers/gpu/drm/virtio/virtgpu_drv.h
> > > > > > > @@ -367,6 +367,10 @@ void virtio_gpu_object_free_sg_table(struct virtio_gpu_object *bo);
> > > > > > > int virtio_gpu_object_wait(struct virtio_gpu_object *bo, bool no_wait);
> > > > > > >
> > > > > > > /* virtgpu_prime.c */
> > > > > > > +struct dma_buf *virtgpu_gem_prime_export(struct drm_gem_object *obj,
> > > > > > > + int flags);
> > > > > > > +struct drm_gem_object *virtgpu_gem_prime_import(struct drm_device *dev,
> > > > > > > + struct dma_buf *buf);
> > > > > > > struct sg_table *virtgpu_gem_prime_get_sg_table(struct drm_gem_object *obj);
> > > > > > > struct drm_gem_object *virtgpu_gem_prime_import_sg_table(
> > > > > > > struct drm_device *dev, struct dma_buf_attachment *attach,
> > > > > > > diff --git a/drivers/gpu/drm/virtio/virtgpu_prime.c b/drivers/gpu/drm/virtio/virtgpu_prime.c
> > > > > > > index dc642a884b88..562eb1a2ed5b 100644
> > > > > > > --- a/drivers/gpu/drm/virtio/virtgpu_prime.c
> > > > > > > +++ b/drivers/gpu/drm/virtio/virtgpu_prime.c
> > > > > > > @@ -22,6 +22,9 @@
> > > > > > > * Authors: Andreas Pokorny
> > > > > > > */
> > > > > > >
> > > > > > > +#include <linux/dma-buf.h>
> > > > > > > +#include <linux/dma-direction.h>
> > > > > > > +
> > > > > > > #include <drm/drm_prime.h>
> > > > > > >
> > > > > > > #include "virtgpu_drv.h"
> > > > > > > @@ -30,6 +33,84 @@
> > > > > > > * device that might share buffers with virtgpu
> > > > > > > */
> > > > > > >
> > > > > > > +static struct sg_table *
> > > > > > > +virtgpu_gem_map_dma_buf(struct dma_buf_attachment *attach,
> > > > > > > + enum dma_data_direction dir)
> > > > > > > +{
> > > > > > > + struct drm_gem_object *obj = attach->dmabuf->priv;
> > > > > > > + struct virtio_gpu_object *bo = gem_to_virtio_gpu_obj(obj);
> > > > > > > + struct sg_table *sgt;
> > > > > > > + int ret;
> > > > > > > +
> > > > > > > + sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
> > > > > > > + if (!sgt)
> > > > > > > + return ERR_PTR(-ENOMEM);
> > > > > > > +
> > > > > > > + ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
> > > > > > > + if (ret) {
> > > > > > > + kfree(sgt);
> > > > > > > + return ERR_PTR(-ENOMEM);
> > > > > > > + }
> > > > > > > +
> > > > > > > + sg_dma_address(sgt->sgl) = bo->hw_res_handle;
> > > > > > > + sg_dma_len(sgt->sgl) = obj->size;
> > > > > > > + sgt->nents = 1;
> > > > > > > +
> > > > > > > + return sgt;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static void virtgpu_gem_unmap_dma_buf(struct dma_buf_attachment *attach,
> > > > > > > + struct sg_table *sgt,
> > > > > > > + enum dma_data_direction dir)
> > > > > > > +{
> > > > > > > + sg_free_table(sgt);
> > > > > > > + kfree(sgt);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static const struct dma_buf_ops virtgpu_dmabuf_ops = {
> > > > > > > + .cache_sgt_mapping = true,
> > > > > > > + .attach = drm_gem_map_attach,
> > > > > > > + .detach = drm_gem_map_detach,
> > > > > > > + .map_dma_buf = virtgpu_gem_map_dma_buf,
> > > > > > > + .unmap_dma_buf = virtgpu_gem_unmap_dma_buf,
> > > > > > > + .release = drm_gem_dmabuf_release,
> > > > > > > + .mmap = drm_gem_dmabuf_mmap,
> > > > > > > + .vmap = drm_gem_dmabuf_vmap,
> > > > > > > + .vunmap = drm_gem_dmabuf_vunmap,
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct dma_buf *virtgpu_gem_prime_export(struct drm_gem_object *obj,
> > > > > > > + int flags)
> > > > > > > +{
> > > > > > > + struct dma_buf *buf;
> > > > > > > +
> > > > > > > + buf = drm_gem_prime_export(obj, flags);
> > > > > > > + if (!IS_ERR(buf))
> > > > > > > + buf->ops = &virtgpu_dmabuf_ops;
> > > > > > > +
> > > > > > > + return buf;
> > > > > > > +}
> > > > > > > +
> > > > > > > +struct drm_gem_object *virtgpu_gem_prime_import(struct drm_device *dev,
> > > > > > > + struct dma_buf *buf)
> > > > > > > +{
> > > > > > > + struct drm_gem_object *obj;
> > > > > > > +
> > > > > > > + if (buf->ops == &virtgpu_dmabuf_ops) {
> > > > > > > + obj = buf->priv;
> > > > > > > + if (obj->dev == dev) {
> > > > > > > + /*
> > > > > > > + * Importing dmabuf exported from our own gem increases
> > > > > > > + * refcount on gem itself instead of f_count of dmabuf.
> > > > > > > + */
> > > > > > > + drm_gem_object_get(obj);
> > > > > > > + return obj;
> > > > > > > + }
> > > > > > > + }
> > > > > > > +
> > > > > > > + return drm_gem_prime_import(dev, buf);
> > > > > > > +}
> > > > > > > +
> > > > > > > struct sg_table *virtgpu_gem_prime_get_sg_table(struct drm_gem_object *obj)
> > > > > > > {
> > > > > > > struct virtio_gpu_object *bo = gem_to_virtio_gpu_obj(obj);
> > > > > > > --
> > > > > > > 2.23.0.237.gc6a4ce50a0-goog
> > > > > > >
> > > > > >
> > > > > > --
> > > > > > Daniel Vetter
> > > > > > Software Engineer, Intel Corporation
> > > > > > http://blog.ffwll.ch
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2019-10-16 11:18    [W:0.097 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site