lkml.org 
[lkml]   [2019]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema
On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
> using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../bindings/mfd/samsung,exynos5433-lpass.txt | 2 +-
> .../bindings/serial/samsung_uart.txt | 58 -------
> .../bindings/serial/samsung_uart.yaml | 148 ++++++++++++++++++
> 3 files changed, 149 insertions(+), 59 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
> create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> index d759da606f75..30ea27c3936d 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
> UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
>
> Bindings of the sub-nodes are described in:
> - ../serial/samsung_uart.txt
> + ../serial/samsung_uart.yaml
> ../sound/samsung-i2s.txt
> ../dma/arm-pl330.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
> deleted file mode 100644
> index e85f37ec33f0..000000000000
> --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Samsung's UART Controller
> -
> -The Samsung's UART controller is used for interfacing SoC with serial
> -communicaion devices.
> -
> -Required properties:
> -- compatible: should be one of following:
> - - "samsung,exynos4210-uart" - Exynos4210 SoC,
> - - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
> - - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
> - - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
> - - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
> - - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
> -
> -- reg: base physical address of the controller and length of memory mapped
> - region.
> -
> -- interrupts: a single interrupt signal to SoC interrupt controller,
> - according to interrupt bindings documentation [1].
> -
> -- clock-names: input names of clocks used by the controller:
> - - "uart" - controller bus clock,
> - - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
> - according to SoC User's Manual (only N = 0 is allowedfor SoCs without
> - internal baud clock mux).
> -- clocks: phandles and specifiers for all clocks specified in "clock-names"
> - property, in the same order, according to clock bindings documentation [2].
> -
> -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Optional properties:
> -- samsung,uart-fifosize: The fifo size supported by the UART channel
> -
> -Note: Each Samsung UART should have an alias correctly numbered in the
> -"aliases" node, according to serialN format, where N is the port number
> -(non-negative decimal integer) as specified by User's Manual of respective
> -SoC.
> -
> -Example:
> - aliases {
> - serial0 = &uart0;
> - serial1 = &uart1;
> - serial2 = &uart2;
> - };
> -
> -Example:
> - uart1: serial@7f005400 {
> - compatible = "samsung,s3c6400-uart";
> - reg = <0x7f005400 0x100>;
> - interrupt-parent = <&vic1>;
> - interrupts = <6>;
> - clock-names = "uart", "clk_uart_baud2",
> - "clk_uart_baud3";
> - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
> - <&clocks SCLK_UART>;
> - samsung,uart-fifosize = <16>;
> - };
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> new file mode 100644
> index 000000000000..276bea1c231a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C, S5P and Exynos SoC UART Controller
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> + - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> +
> +description: |+
> + Each Samsung UART should have an alias correctly numbered in the "aliases"
> + node, according to serialN format, where N is the port number (non-negative
> + decimal integer) as specified by User's Manual of respective SoC.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - samsung,s3c2410-uart
> + - samsung,s3c2412-uart
> + - samsung,s3c2440-uart
> + - samsung,s3c6400-uart
> + - samsung,s5pv210-uart
> + - samsung,exynos4210-uart
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 2
> + maxItems: 5
> +
> + clock-names:
> + description: |
> + List of clock names:
> + - "uart" - controller bus clock,
> + - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).

Kind of redundant to list this here.

> + N = 0 is allowed for SoCs without internal baud clock mux.

You can add a description with the item:

items:
- pattern: '^clk_uart_baud[0-3]$'
description: N = 0 is allowed for SoCs without internal baud clock mux.

Or leave it here is fine too.

> + minItems: 2
> + maxItems: 5
> + allOf:
> + - uniqueItems: true

You can drop this.

> + - oneOf:
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-3]$'
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'
> + - pattern: '^clk_uart_baud[0-3]$'

You only need the last case. With 'minItems: 2', the additional items
here will just be ignored.

> +
> + interrupts:
> + minItems: 1
> + maxItems: 2

What is each item?

> +
> + samsung,uart-fifosize:
> + description: The fifo size supported by the UART channel
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [16, 64, 256]
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - interrupts
> + - reg
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,s3c2410-uart
> + - samsung,s5pv210-uart
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 3
> + clock-names:
> + minItems: 2
> + maxItems: 3
> + allOf:
> + - uniqueItems: true
> + - oneOf:
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-1]$'
> + - items:
> + - const: uart
> + - pattern: '^clk_uart_baud[0-1]$'
> + - pattern: '^clk_uart_baud[0-1]$'

Similar simplification can be done here.

> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,exynos4210-uart
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + minItems: 2
> + maxItems: 2
> + allOf:
> + - uniqueItems: true
> + - items:
> + - const: uart
> + - const: clk_uart_baud0
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
> +
> + aliases {
> + serial0 = &uart0;
> + };

Drop this. It will cause a warning if we enforce 'aliases' to be at the
root node.

> +
> + uart0: serial@7f005000 {
> + compatible = "samsung,s3c6400-uart";
> + reg = <0x7f005000 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <5>;
> + clock-names = "uart", "clk_uart_baud2",
> + "clk_uart_baud3";
> + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
> + <&clocks SCLK_UART>;
> + samsung,uart-fifosize = <16>;
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-10-15 21:41    [W:0.503 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site