lkml.org 
[lkml]   [2019]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT
On Sat 12 Oct 07:58 PDT 2019, nikitos.tr@gmail.com wrote:

> From: Nikita Travkin <nikitos.tr@gmail.com>
>
> WCNSS is used on L8150 for WiFi and BT.
> Its firmware isn't relocatable and must be loaded at specific address.
>
> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>

Both patches applied

Thank you,
Bjorn

> ---
> .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> index 2b28e383fd0b..e4d467e7dedb 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> @@ -18,6 +18,16 @@
> stdout-path = "serial0";
> };
>
> + reserved-memory {
> + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
> + /delete-node/ wcnss@89300000;
> +
> + wcnss_mem: wcnss@8b600000 {
> + reg = <0x0 0x8b600000 0x0 0x600000>;
> + no-map;
> + };
> + };
> +
> soc {
> sdhci@7824000 {
> status = "okay";
> @@ -68,6 +78,10 @@
> };
> };
>
> + wcnss@a21b000 {
> + status = "okay";
> + };
> +
> /*
> * Attempting to enable these devices causes a "synchronous
> * external abort". Suspected cause is that the debug power
> --
> 2.19.1
>

\
 
 \ /
  Last update: 2019-10-15 08:28    [W:0.075 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site