lkml.org 
[lkml]   [2019]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
Date
> 
> On 2019-10-14 06:16, Biwen Li wrote:
> >>
> >>>
> >>> On Mon, Sep 30, 2019 at 11:25:03AM +0800, Biwen Li wrote:
> >>>> The patch adds an optional property i2c-mux-never-disable
> >>>>
> >>>> Signed-off-by: Biwen Li <biwen.li@nxp.com>
> >>>> ---
> >>>> Change in v2:
> >>>> - update documentation
> >>>>
> >>>> Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 1 +
> >>>> 1 file changed, 1 insertion(+)
> >>>>
> >>>> diff --git
> >>>> a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> >>>> b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> >>>> index 30ac6a60f041..71b73d0fdb62 100644
> >>>> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> >>>> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> >>>> @@ -34,6 +34,7 @@ Optional Properties:
> >>>> - first cell is the pin number
> >>>> - second cell is used to specify flags.
> >>>> See also
> >>>> Documentation/devicetree/bindings/interrupt-controller/interrupts.t
> >>>> x
> >>>> t
> >>>> + - i2c-mux-never-disable: always forces mux to be enabled.
> >>>
> >>> Either needs to have a vendor prefix or be documented as a common
> >>> property.
> > I choose to be documented as a common property.
>
> Can we please just drop the never-disable approach and focus on idle-state
> instead?
I will focus on idle-state property, thanks.
>
> >>>
> >>> IIRC, we already have a property for mux default state which seems
> >>> like that would cover this unless you need to leave it in different states.
> >> Okay, you are right, thank you so much. I will try it in v3.
> > Do you mean that the property is i2c-mux-idle-disconnect in
> Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt?
> > If so, the property i2c-mux-idle-disconnect is not good for me.
> > Because condition of the property i2c-mux-idle-disconnect is in idle
> state(sometimes).
> > But I need always enable i2c multiplexer in whatever state(anytime), so I
> add a common property i2c-mux-never-disable.
>
> No, I do not think any new property is needed. AFAICT, idle-state fits
> perfectly, and I will not consider this i2c-mux-never-disable approach until
> some compelling reason is presented why idle-state is not appropriate. You
> promised to take a stab at it, and until I hear back on that, this series is on
> hold. As indicated here [1].
>
> You need to patch the driver to look at the idle-state property instead of
> inventing a new (and less flexible) property. If you implement idle-state for
> this driver and set the idle-state to some channel in the dts, the mux will
> never disconnect. Problem solved.
> Perhaps not your first solution, but it does solve your problem and may
> actually be useful for other purposes than your broken hardware.
> And it is consistent across other i2c-muxes. I see no downside.
Got it, thanks, I will try it.
>
> Cheers,
> Peter
>
> [1]
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.k
> ernel.org%2Flkml%2F07d85748-0721-39d4-d2be-13eb16b0f1de%40axenti
> a.se%2F&amp;data=02%7C01%7Cbiwen.li%40nxp.com%7C4fdea02b48b94
> ed1031f08d7507509ac%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%
> 7C0%7C637066335914038253&amp;sdata=aZfxDhLPX%2FSMFGuW8ryM
> %2BcxQetFUDpdxxLa%2BuUQs7I4%3D&amp;reserved=0
\
 
 \ /
  Last update: 2019-10-14 09:27    [W:0.981 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site