lkml.org 
[lkml]   [2019]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] media: meson: vdec: Add compliant H264 support
From
Date
Le lundi 07 octobre 2019 à 16:59 +0200, Maxime Jourdan a écrit :
> Hello,
>
> This patch series aims to bring H.264 support as well as compliance update
> to the amlogic stateful video decoder driver.
>
> There is 1 issue that remains currently:
>
> - The following codepath had to be commented out from v4l2-compliance as
> it led to stalling:
>
> if (node->codec_mask & STATEFUL_DECODER) {
> struct v4l2_decoder_cmd cmd;
> buffer buf_cap(m2m_q);
>
> memset(&cmd, 0, sizeof(cmd));
> cmd.cmd = V4L2_DEC_CMD_STOP;
>
> /* No buffers are queued, call STREAMON, then STOP */
> fail_on_test(node->streamon(q.g_type()));
> fail_on_test(node->streamon(m2m_q.g_type()));
> fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>
> fail_on_test(buf_cap.querybuf(node, 0));
> fail_on_test(buf_cap.qbuf(node));
> fail_on_test(buf_cap.dqbuf(node));
> fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
> for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
> fail_on_test(buf_cap.g_bytesused(p));
> fail_on_test(node->streamoff(q.g_type()));
> fail_on_test(node->streamoff(m2m_q.g_type()));
>
> /* Call STREAMON, queue one CAPTURE buffer, then STOP */
> fail_on_test(node->streamon(q.g_type()));
> fail_on_test(node->streamon(m2m_q.g_type()));
> fail_on_test(buf_cap.querybuf(node, 0));
> fail_on_test(buf_cap.qbuf(node));
> fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>
> fail_on_test(buf_cap.dqbuf(node));
> fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
> for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
> fail_on_test(buf_cap.g_bytesused(p));
> fail_on_test(node->streamoff(q.g_type()));
> fail_on_test(node->streamoff(m2m_q.g_type()));
> }
>
> The reason for this is because the driver has a limitation where all
> capturebuffers must be queued to the driver before STREAMON is effective.
> The firmware needs to know in advance what all the buffers are before
> starting to decode.
> This limitation is enforced via q->min_buffers_needed.
> As such, in this compliance codepath, STREAMON is never actually called
> driver-side and there is a stall on fail_on_test(buf_cap.dqbuf(node));
>
>
> One last detail: V4L2_FMT_FLAG_DYN_RESOLUTION is currently not recognized
> by v4l2-compliance, so it was left out for the test. However, it is
> present in the patch series.
>
> The second patch has 3 "Alignment should match open parenthesis" lines
> where I preferred to keep them that way.
>
> Thanks Stanimir for sharing your HDR file creation tools, this was very
> helpful :).

I tried to test this with a pending branch of GStreamer supporting
dynamic resolution changes. The even driver mechanism does not seem to
work with this driver. I've grepped the code, and don't see any places
were the event would be emitted.

Then I grepped, and it seems the driver accept source_change
subscription but does not set V4L2_FMT_FLAG_DYN_RESOLUTION. I believe
these two things are bit redundant and confusing, I'll fix the proposed
patch never the less, and see if that makes it work.

>
> Maxime
>
> # v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
> v4l2-compliance SHA: a162244d47d4bb01d0692da879dce5a070f118e7, 64 bits
>
> Compliance test for meson-vdec device /dev/video0:
>
> Driver Info:
> Driver name : meson-vdec
> Card type : Amlogic Video Decoder
> Bus info : platform:meson-vdec
> Driver version : 5.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Decoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test blocking wait: OK
> Video Capture Multiplanar: Captured 250 buffers
> test MMAP (select): OK
> Video Capture Multiplanar: Captured 250 buffers
> test MMAP (epoll): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for meson-vdec device /dev/video0: 49, Succeeded: 49, Failed: 0, Warnings: 0
>
> Maxime Jourdan (2):
> media: meson: vdec: bring up to compliance
> media: meson: vdec: add H.264 decoding support
>
> drivers/staging/media/meson/vdec/Makefile | 2 +-
> drivers/staging/media/meson/vdec/codec_h264.c | 482 ++++++++++++++++++
> drivers/staging/media/meson/vdec/codec_h264.h | 14 +
> drivers/staging/media/meson/vdec/esparser.c | 34 +-
> drivers/staging/media/meson/vdec/vdec.c | 70 ++-
> drivers/staging/media/meson/vdec/vdec.h | 14 +-
> .../staging/media/meson/vdec/vdec_helpers.c | 85 ++-
> .../staging/media/meson/vdec/vdec_helpers.h | 6 +-
> .../staging/media/meson/vdec/vdec_platform.c | 43 ++
> 9 files changed, 654 insertions(+), 96 deletions(-)
> create mode 100644 drivers/staging/media/meson/vdec/codec_h264.c
> create mode 100644 drivers/staging/media/meson/vdec/codec_h264.h
>

\
 
 \ /
  Last update: 2019-10-13 03:09    [W:0.076 / U:2.508 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site