lkml.org 
[lkml]   [2019]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] iio: (bma400) add driver for the BMA400
From
Date
On 10/12/19 12:25 PM, Dan Robertson wrote:
> Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer.
> The driver supports reading from the acceleration and temperature
> registers. The driver also supports reading and configuring the output data
> rate, oversampling ratio, and scale.
>
> Signed-off-by: Dan Robertson <dan@dlrobertson.com>
> ---
> drivers/iio/accel/Kconfig | 18 +
> drivers/iio/accel/Makefile | 2 +
> drivers/iio/accel/bma400.h | 80 ++++
> drivers/iio/accel/bma400_core.c | 788 ++++++++++++++++++++++++++++++++
> drivers/iio/accel/bma400_i2c.c | 60 +++
> 5 files changed, 948 insertions(+)
> create mode 100644 drivers/iio/accel/bma400.h
> create mode 100644 drivers/iio/accel/bma400_core.c
> create mode 100644 drivers/iio/accel/bma400_i2c.c

No comment other than thank you for ignoring my previous comments. :(

--
~Randy

\
 
 \ /
  Last update: 2019-10-12 22:32    [W:0.034 / U:15.260 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site