lkml.org 
[lkml]   [2019]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4/4] docs: admin-guide: dell_rbu: Improve formatting and spelling
    Date
    This improves readability a bit.

    Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
    ---
    Documentation/admin-guide/dell_rbu.rst | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    diff --git a/Documentation/admin-guide/dell_rbu.rst b/Documentation/admin-guide/dell_rbu.rst
    index 10830db9e616..8d70e1fc9f9d 100644
    --- a/Documentation/admin-guide/dell_rbu.rst
    +++ b/Documentation/admin-guide/dell_rbu.rst
    @@ -5,7 +5,7 @@ Dell Remote BIOS Update driver (dell_rbu)
    Purpose
    =======

    -Document demonstrating the use of the Dell Remote BIOS Update driver.
    +Document demonstrating the use of the Dell Remote BIOS Update driver
    for updating BIOS images on Dell servers and desktops.

    Scope
    @@ -37,7 +37,7 @@ maintains a link list of packets for reading them back.

    If the dell_rbu driver is unloaded all the allocated memory is freed.

    -The rbu driver needs to have an application (as mentioned above)which will
    +The rbu driver needs to have an application (as mentioned above) which will
    inform the BIOS to enable the update in the next system reboot.

    The user should not unload the rbu driver after downloading the BIOS image
    @@ -71,7 +71,7 @@ be downloaded. It is done as below::
    echo XXXX > /sys/devices/platform/dell_rbu/packet_size

    In the packet update mechanism, the user needs to create a new file having
    -packets of data arranged back to back. It can be done as follows
    +packets of data arranged back to back. It can be done as follows:
    The user creates packets header, gets the chunk of the BIOS image and
    places it next to the packetheader; now, the packetheader + BIOS image chunk
    added together should match the specified packet_size. This makes one
    @@ -114,7 +114,7 @@ The entries can be recreated by doing the following::

    echo init > /sys/devices/platform/dell_rbu/image_type

    -.. note:: echoing init in image_type does not change it original value.
    +.. note:: echoing init in image_type does not change its original value.

    Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
    read back the image downloaded.
    --
    2.20.1
    \
     
     \ /
      Last update: 2019-10-12 19:13    [W:6.072 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site