lkml.org 
[lkml]   [2019]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/8] iio: adc: max1027: Prepare the introduction of different resolutions
On Fri, 11 Oct 2019 16:43:43 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Maxim's max1027/29/31 series returns the measured voltages with a
> resolution of 10 bits. There is a very similar series, max1227/29/31
> which works identically but uses a resolution of 12 bits. Prepare the
> support for these chips by turning the 'depth' into a macro parameter
> instead of hardcoding it everywhere. Also reorganize just a bit the
> macros at the top to avoid repeating tens of lines when adding support
> for a new chip.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Applied.

Thanks,

Jonathan

> ---
> drivers/iio/adc/max1027.c | 74 +++++++++++++++++----------------------
> 1 file changed, 32 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
> index f9b473ee6711..8b449044bef5 100644
> --- a/drivers/iio/adc/max1027.c
> +++ b/drivers/iio/adc/max1027.c
> @@ -83,7 +83,7 @@ static const struct of_device_id max1027_adc_dt_ids[] = {
> MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
> #endif
>
> -#define MAX1027_V_CHAN(index) \
> +#define MAX1027_V_CHAN(index, depth) \
> { \
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> @@ -93,7 +93,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
> .scan_index = index + 1, \
> .scan_type = { \
> .sign = 'u', \
> - .realbits = 10, \
> + .realbits = depth, \
> .storagebits = 16, \
> .shift = 2, \
> .endianness = IIO_BE, \
> @@ -115,52 +115,42 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
> }, \
> }
>
> +#define MAX1X27_CHANNELS(depth) \
> + MAX1027_T_CHAN, \
> + MAX1027_V_CHAN(0, depth), \
> + MAX1027_V_CHAN(1, depth), \
> + MAX1027_V_CHAN(2, depth), \
> + MAX1027_V_CHAN(3, depth), \
> + MAX1027_V_CHAN(4, depth), \
> + MAX1027_V_CHAN(5, depth), \
> + MAX1027_V_CHAN(6, depth), \
> + MAX1027_V_CHAN(7, depth)
> +
> +#define MAX1X29_CHANNELS(depth) \
> + MAX1X27_CHANNELS(depth), \
> + MAX1027_V_CHAN(8, depth), \
> + MAX1027_V_CHAN(9, depth), \
> + MAX1027_V_CHAN(10, depth), \
> + MAX1027_V_CHAN(11, depth)
> +
> +#define MAX1X31_CHANNELS(depth) \
> + MAX1X27_CHANNELS(depth), \
> + MAX1X29_CHANNELS(depth), \
> + MAX1027_V_CHAN(12, depth), \
> + MAX1027_V_CHAN(13, depth), \
> + MAX1027_V_CHAN(14, depth), \
> + MAX1027_V_CHAN(15, depth)
> +
> static const struct iio_chan_spec max1027_channels[] = {
> - MAX1027_T_CHAN,
> - MAX1027_V_CHAN(0),
> - MAX1027_V_CHAN(1),
> - MAX1027_V_CHAN(2),
> - MAX1027_V_CHAN(3),
> - MAX1027_V_CHAN(4),
> - MAX1027_V_CHAN(5),
> - MAX1027_V_CHAN(6),
> - MAX1027_V_CHAN(7)
> + MAX1X27_CHANNELS(10),
> };
>
> static const struct iio_chan_spec max1029_channels[] = {
> - MAX1027_T_CHAN,
> - MAX1027_V_CHAN(0),
> - MAX1027_V_CHAN(1),
> - MAX1027_V_CHAN(2),
> - MAX1027_V_CHAN(3),
> - MAX1027_V_CHAN(4),
> - MAX1027_V_CHAN(5),
> - MAX1027_V_CHAN(6),
> - MAX1027_V_CHAN(7),
> - MAX1027_V_CHAN(8),
> - MAX1027_V_CHAN(9),
> - MAX1027_V_CHAN(10),
> - MAX1027_V_CHAN(11)
> + MAX1X29_CHANNELS(10),
> };
>
> static const struct iio_chan_spec max1031_channels[] = {
> - MAX1027_T_CHAN,
> - MAX1027_V_CHAN(0),
> - MAX1027_V_CHAN(1),
> - MAX1027_V_CHAN(2),
> - MAX1027_V_CHAN(3),
> - MAX1027_V_CHAN(4),
> - MAX1027_V_CHAN(5),
> - MAX1027_V_CHAN(6),
> - MAX1027_V_CHAN(7),
> - MAX1027_V_CHAN(8),
> - MAX1027_V_CHAN(9),
> - MAX1027_V_CHAN(10),
> - MAX1027_V_CHAN(11),
> - MAX1027_V_CHAN(12),
> - MAX1027_V_CHAN(13),
> - MAX1027_V_CHAN(14),
> - MAX1027_V_CHAN(15)
> + MAX1X31_CHANNELS(10),
> };
>
> static const unsigned long max1027_available_scan_masks[] = {
> @@ -284,7 +274,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev,
> break;
> case IIO_VOLTAGE:
> *val = 2500;
> - *val2 = 10;
> + *val2 = chan->scan_type.realbits;
> ret = IIO_VAL_FRACTIONAL_LOG2;
> break;
> default:

\
 
 \ /
  Last update: 2019-10-12 13:35    [W:1.258 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site