lkml.org 
[lkml]   [2019]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hw_random: move add_early_randomness() out of rng_mutex
From
Date
On 11/10/2019 10:45, Marek Szyprowski wrote:
> Hi Laurent,
>
> On 12.09.2019 15:30, Laurent Vivier wrote:
>> add_early_randomness() is called every time a new rng backend is added
>> and every time it is set as the current rng provider.
>>
>> add_early_randomness() is called from functions locking rng_mutex,
>> and if it hangs all the hw_random framework hangs: we can't read sysfs,
>> add or remove a backend.
>>
>> This patch move add_early_randomness() out of the rng_mutex zone.
>> It only needs the reading_mutex.
>>
>> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
>
> This patch landed in today's linux-next and causes the following warning
> on ARM 32bit Exynos5420-based Chromebook Peach-Pit board:
>
> tpm_i2c_infineon 9-0020: 1.2 TPM (device-id 0x1A)
> ------------[ cut here ]------------
> WARNING: CPU: 3 PID: 1 at lib/refcount.c:156 hwrng_register+0x13c/0x1b4
> refcount_t: increment on 0; use-after-free.
> Modules linked in:
> CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00061-gdaae28debcb0
> #6714
> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> [<c01124c8>] (unwind_backtrace) from [<c010dfb8>] (show_stack+0x10/0x14)
> [<c010dfb8>] (show_stack) from [<c0ae86d8>] (dump_stack+0xa8/0xd4)
> [<c0ae86d8>] (dump_stack) from [<c0127428>] (__warn+0xf4/0x10c)
> [<c0127428>] (__warn) from [<c01274b4>] (warn_slowpath_fmt+0x74/0xb8)
> [<c01274b4>] (warn_slowpath_fmt) from [<c054729c>]
> (hwrng_register+0x13c/0x1b4)

This can happen if hwrng_init() has not been called for rng, that is
called by set_current_rng().

It appears with this patch because I have introduced the kref_get()
before the call of add_early_randomness() when the rng device is new but
is not set as the current one. So add_early_randomness() was called on
an unitialized device (it was already the case before)

I wanted to take the ref before releasing the mutex to avoid race
condition, but if the new rng device is not the new current_rng one, we
don't need that as the ref is only used with current_rng device.

I'm going to rework this patch.

Thanks,
Laurent

\
 
 \ /
  Last update: 2019-10-11 13:02    [W:0.087 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site