lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/4] lib: introduce copy_struct_from_user() helper
On 2019-10-10, Michael Ellerman <mpe@ellerman.id.au> wrote:
> Aleksa Sarai <cyphar@cyphar.com> writes:
> > A common pattern for syscall extensions is increasing the size of a
> > struct passed from userspace, such that the zero-value of the new fields
> > result in the old kernel behaviour (allowing for a mix of userspace and
> > kernel vintages to operate on one another in most cases).
> >
> > While this interface exists for communication in both directions, only
> > one interface is straightforward to have reasonable semantics for
> > (userspace passing a struct to the kernel). For kernel returns to
> > userspace, what the correct semantics are (whether there should be an
> > error if userspace is unaware of a new extension) is very
> > syscall-dependent and thus probably cannot be unified between syscalls
> > (a good example of this problem is [1]).
> >
> > Previously there was no common lib/ function that implemented
> > the necessary extension-checking semantics (and different syscalls
> > implemented them slightly differently or incompletely[2]). Future
> > patches replace common uses of this pattern to make use of
> > copy_struct_from_user().
> >
> > Some in-kernel selftests that insure that the handling of alignment and
> > various byte patterns are all handled identically to memchr_inv() usage.
> ...
> > diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
> > index 67bcd5dfd847..950ee88cd6ac 100644
> > --- a/lib/test_user_copy.c
> > +++ b/lib/test_user_copy.c
> > @@ -31,14 +31,133 @@
> ...
> > +static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size)
> > +{
> > + int ret = 0;
> > + size_t start, end, i;
> > + size_t zero_start = size / 4;
> > + size_t zero_end = size - zero_start;
> > +
> > + /*
> > + * We conduct a series of check_nonzero_user() tests on a block of memory
> > + * with the following byte-pattern (trying every possible [start,end]
> > + * pair):
> > + *
> > + * [ 00 ff 00 ff ... 00 00 00 00 ... ff 00 ff 00 ]
> > + *
> > + * And we verify that check_nonzero_user() acts identically to memchr_inv().
> > + */
> > +
> > + memset(kmem, 0x0, size);
> > + for (i = 1; i < zero_start; i += 2)
> > + kmem[i] = 0xff;
> > + for (i = zero_end; i < size; i += 2)
> > + kmem[i] = 0xff;
> > +
> > + ret |= test(copy_to_user(umem, kmem, size),
> > + "legitimate copy_to_user failed");
> > +
> > + for (start = 0; start <= size; start++) {
> > + for (end = start; end <= size; end++) {
> > + size_t len = end - start;
> > + int retval = check_zeroed_user(umem + start, len);
> > + int expected = is_zeroed(kmem + start, len);
> > +
> > + ret |= test(retval != expected,
> > + "check_nonzero_user(=%d) != memchr_inv(=%d) mismatch (start=%zu, end=%zu)",
> > + retval, expected, start, end);
> > + }
> > + }
>
> This is causing soft lockups for me on powerpc, eg:
>
> [ 188.208315] watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [modprobe:611]
> [ 188.208782] Modules linked in: test_user_copy(+) vmx_crypto gf128mul crc32c_vpmsum virtio_balloon ip_tables x_tables autofs4
> [ 188.209594] CPU: 4 PID: 611 Comm: modprobe Tainted: G L 5.4.0-rc1-gcc-8.2.0-00001-gf5a1a536fa14-dirty #1151
> [ 188.210392] NIP: c000000000173650 LR: c000000000379cb0 CTR: c0000000007b20d0
> [ 188.210612] REGS: c0000000ec213560 TRAP: 0901 Tainted: G L (5.4.0-rc1-gcc-8.2.0-00001-gf5a1a536fa14-dirty)
> [ 188.210876] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222422 XER: 20000000
> [ 188.211060] CFAR: c000000000379cac IRQMASK: 0
> [ 188.211060] GPR00: c000000000379cb0 c0000000ec2137f0 c0000000013bbb00 c000000000f527f0
> [ 188.211060] GPR04: 000000000000004b 0000000000000000 00000000000085f5 c00000000fffb780
> [ 188.211060] GPR08: 0000000000000000 0000000000000000 c0000000fb9a3080 c008000000411478
> [ 188.211060] GPR12: c0000000007b20d0 c00000000fffb780
> [ 188.211802] NIP [c000000000173650] __might_sleep+0x20/0xc0
> [ 188.211924] LR [c000000000379cb0] __might_fault+0x40/0x60
> [ 188.212037] Call Trace:
> [ 188.212101] [c0000000ec2137f0] [c0000000001b99b4] vprintk_func+0xc4/0x230 (unreliable)
> [ 188.212274] [c0000000ec213810] [c0000000007b21fc] check_zeroed_user+0x12c/0x200
> [ 188.212478] [c0000000ec213860] [c0080000004106cc] test_user_copy_init+0x67c/0x1210 [test_user_copy]
> [ 188.212681] [c0000000ec2139a0] [c000000000010440] do_one_initcall+0x60/0x340
> [ 188.212859] [c0000000ec213a70] [c000000000213d4c] do_init_module+0x7c/0x2f0
> [ 188.213004] [c0000000ec213b00] [c000000000216f24] load_module+0x2d94/0x30e0
> [ 188.213150] [c0000000ec213d00] [c000000000217578] __do_sys_finit_module+0xc8/0x150
> [ 188.213350] [c0000000ec213e20] [c00000000000b5d8] system_call+0x5c/0x68
> [ 188.213494] Instruction dump:
> [ 188.213587] 409efec0 4e800020 60000000 60000000 3c4c0125 384284d0 7c0802a6 60000000
> [ 188.213767] fba1ffe8 fbc1fff0 fbe1fff8 7c9e2378 <f821ff81> 7c7f1b78 7cbd2b78 e94d0958
>
>
> I think it's partly because I have DEBUG_ATOMIC_SLEEP enabled, which
> means each unsafe_get_user() calls __might_fault() etc.
>
> But even turning that off, it still takes forever.
>
> > @@ -106,6 +225,11 @@ static int __init test_user_copy_init(void)
> > #endif
> > #undef test_legit
> >
> > + /* Test usage of check_nonzero_user(). */
> > + ret |= test_check_nonzero_user(kmem, usermem, 2 * PAGE_SIZE);
>
> I suspect it's just that PAGE_SIZE for me is 64K, and so the nested loop
> above gets too big too fast.
>
> If my math is right it's doing about 500 million iterations, vs ~2
> million on a 4K kernel.
>
> If I do the change below the entire test_user_copy module loads and runs
> all the tests in about 10 seconds.
>
> diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
> index 950ee88cd6ac..03b617a36144 100644
> --- a/lib/test_user_copy.c
> +++ b/lib/test_user_copy.c
> @@ -226,7 +226,7 @@ static int __init test_user_copy_init(void)
> #undef test_legit
>
> /* Test usage of check_nonzero_user(). */
> - ret |= test_check_nonzero_user(kmem, usermem, 2 * PAGE_SIZE);
> + ret |= test_check_nonzero_user(kmem, usermem, 2 * 4096);
> /* Test usage of copy_struct_from_user(). */
> ret |= test_copy_struct_from_user(kmem, usermem, 2 * PAGE_SIZE);
>
>
> How long does it take on your systems? Is 10s in the ball park, or is
> there something else pathological happening on my machine, and shrinking
> it to 4096 is just papering over it?

Yeah, it takes about 5-10s on my laptop. We could switch it to just
everything within a 4K block, but the main reason for testing with
2*PAGE_SIZE is to make sure that check_nonzero_user() works across page
boundaries. Though we could only do check_nonzero_user() in the region
of the page boundary (maybe i E (PAGE_SIZE-512,PAGE_SIZE+512]?)

Making a single test run for ~40min doesn't seem like that good of an
idea in retrospect. :P

--
Aleksa Sarai
Senior Software Engineer (Containers)
SUSE Linux GmbH
<https://www.cyphar.com/>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-10-10 13:41    [W:0.149 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site