lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: mtk-xhci: Set the XHCI_NO_64BIT_SUPPORT quirk
Date
MediaTek XHCI host controller does not support 64-bit addressing despite
the AC64 bit of HCCPARAMS1 register being set. The platform-specific
glue sets the DMA mask to 32 bits on its own, but it has no effect,
because xhci_gen_setup() overrides it according to hardware
capabilities.

Use the XHCI_NO_64BIT_SUPPORT quirk to tell the XHCI core to force
32-bit DMA mask instead.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
---
drivers/usb/host/xhci-mtk.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b18a6baef204a..4d101d52cc11b 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -395,6 +395,11 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
if (mtk->lpm_support)
xhci->quirks |= XHCI_LPM_SUPPORT;
+ /*
+ * MTK host controller does not support 64-bit addressing, despite
+ * having the AC64 bit of the HCCPARAMS1 register set.
+ */
+ xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
}

/* called during probe() after chip reset completes */
@@ -488,11 +493,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
goto disable_clk;
}

- /* Initialize dma_mask and coherent_dma_mask to 32-bits */
- ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret)
- goto disable_clk;
-
hcd = usb_create_hcd(driver, dev, dev_name(dev));
if (!hcd) {
ret = -ENOMEM;
--
2.23.0.581.g78d2f28ef7-goog
\
 
 \ /
  Last update: 2019-10-10 09:50    [W:0.101 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site